broken valve on tyre

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
Ben
Fast Driver
Posts: 146
Joined: Mon May 17, 2004 1:35 pm

broken valve on tyre

Postby Ben » Wed Jun 14, 2006 12:07 pm

this might seem like a silly question but...

ok so i got a half flat tyre driving from lane cove to rockdale on saturday night.

I pulled into a servo to see i f i could just refill it to limp home. I took off the cap and found that the valve did not have the tiny metal centre piece that sticks up in the centre of the valev ( the exact name for this part of valve im not sure).

therefore i could not re inflate.

so my question is, providing this is the only problem with the tyre (which otherwise has only about 3000 ks on it and is in cood cond) can the valve just be replaced?

cheers
Ben
Top
Curly
Fast Driver
Posts: 329
Joined: Sun Oct 24, 2004 8:48 pm
Vehicle: NA6
Location: Perth
Contact:
Contact Curly

Postby Curly » Wed Jun 14, 2006 12:36 pm

Probably, yeah.

Just pop into your local tyre shop - should only take them 10 minutes to replace the valve.
Top
User avatar
DanielB
Driver
Posts: 94
Joined: Sun Feb 26, 2006 12:58 pm
Vehicle: NB8B
Location: Sydney

Postby DanielB » Wed Jun 14, 2006 8:32 pm

Yes; the valve can be replaced. Happened to me a while ago :D
Top
olihaub

Postby olihaub » Wed Jun 21, 2006 1:51 am

valve and tyre are totally seperate things and can easily be replaced
Top
Ben
Fast Driver
Posts: 146
Joined: Mon May 17, 2004 1:35 pm

Postby Ben » Thu Jun 22, 2006 12:14 pm

thanks guys

yeah i got it replaced for free. unfortunately i forgot to take the nuts from home so had to buy new nuts, so it cost me $10
Top
User avatar
Fuzzlet
Racing Driver
Posts: 1077
Joined: Sat Feb 25, 2006 6:35 pm
Vehicle: ND - 2 GT
Location: Berowra
Contact:
Contact Fuzzlet

Postby Fuzzlet » Thu Jun 22, 2006 11:55 pm

Simple to change - go to a servo or repco etc, buy some new tyre valves. Hoist ur wheel up like u would if u were to change the wheels. Unscrew the old valve, screw in a new one, re-inflate ur tyre....generally best if you do this at the servo thought :P
Current: Red 04 SE (Slightly modified) - 133rwkw@7psi - Winner of the Mania Dyno Day 2008
Previous: Titanium 04 SE (Standard)
White 94 NA (Severely Modified) - 180rwkw - Runner up at the Mania Dyno Day 2007
Top
User avatar
Uncle Arthur
Dodgy Award Benefactor
Posts: 1802
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: ND - 2 GT
Location: Doesn't matter where I'm from-it's that your daughter is with me that's the biggest concern :D
Contact:
Contact Uncle Arthur

Re:

Postby Uncle Arthur » Fri Jun 23, 2006 1:05 pm

Ben wrote:thanks guys

yeah i got it replaced for free. unfortunately i forgot to take the nuts from home so had to buy new nuts, so it cost me $10


Don't you hate it when you leave your nuts behind and have to buy new ones or borrow some instead????? :shock:
Founder of the QLD Chapter of the Honourable Brothers of Dodgy.

Benefactor of the Perpetual Dodgy award - Inaugural year 2007.
Top
Post Reply

Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 186 guests