Does anyone know of a walkthru 4 a NB8B plug change?
Done them heaps of times on other cars, but I want to make sure that i don't wreck anything. I'm an old tmer used to just taking the leads off and viola, but this looks more complicated.
Cheers all.
Walkthru 4 NB8B plug change???
Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel
-
ma64rk
- Fast Driver
- Posts: 115
- Joined: Thu Mar 09, 2006 9:44 pm
- Vehicle: ND - 2 GT
- Location: Melbourne
Walkthru 4 NB8B plug change???
Take the road less traveled...
Silver 01 w/hardtop & stylebars...
Silver 01 w/hardtop & stylebars...
-
Bevan
- Speed Racer
- Posts: 2599
- Joined: Tue Nov 16, 2004 8:18 pm
- Vehicle: ND - 2 GT
- Location: N-West Sydney
You can take the strut brace off if you like to make more room.
Unscrew the bolts that hold the two coil packs on and pull everything out. The 2 with the coils, just pull up on the coill, the two with the leads, just pull the plugs off.
You'll need the small spark plug socket with a LONG extension. Those pods are deep and narrow.
When putting it together it's obvious where they go on again if you forget to make note of where they go.
Unscrew the bolts that hold the two coil packs on and pull everything out. The 2 with the coils, just pull up on the coill, the two with the leads, just pull the plugs off.
You'll need the small spark plug socket with a LONG extension. Those pods are deep and narrow.
When putting it together it's obvious where they go on again if you forget to make note of where they go.
-
Bevan
- Speed Racer
- Posts: 2599
- Joined: Tue Nov 16, 2004 8:18 pm
- Vehicle: ND - 2 GT
- Location: N-West Sydney
-
sabretooth
- Speed Racer
- Posts: 2119
- Joined: Wed Apr 23, 2003 11:00 am
- Vehicle: NA8 - Turbo
Return to “MX5 Engines, Transmission & Final Drive”
Who is online
Users browsing this forum: No registered users and 5 guests
