Moss Transmission Chassis Brace

Brad · Postby **Brad** » Thu Mar 16, 2006 9:31 am

This is the one you need to install prior to getting their butterfly brace right? I've read good things about them on the big forum, expecially when you add the butterfly.

Me · Postby Me » Fri Mar 17, 2006 3:24 am

Inf3ct0R wrote:
Me wrote:
kula wrote:how much?

$320 + shipping. keep in mind that it is a light weight aluminum in rectangular shape. a very high quality piece.

got pics?

i will post pic when the brace arrives next week. PM me in case i forgot.

Me · Postby Me » Sat Apr 01, 2006 9:38 pm

Russellb · Postby **Russellb** » Sun Apr 02, 2006 8:45 pm

Well I took Caseys advise and built a lower profile version .it sits at the same level as the standed front brace .
I tryed some nolatane bushes and found it to harsh then went to some rubber bushing and it almost livable as a daily driver but there is still a harsh vibration at 1800 RPM. So back to the R&D table and put in some bigger bushes. On the up side there is a noticable increase in the stifness and power derlivery .the power is transfered much quicker now the motor doesn't more as much anymore.

phatMX · Postby **phatMX** » Sun Apr 02, 2006 10:04 pm

Thanks for the post Russellb, great to hear. Let us know when its done ;)

dv8one · Postby **dv8one** » Mon Apr 10, 2006 11:19 pm

I had the same trouble with vibration in the 1800 - 2100rpm area. The feel with the cross member in place at high revs is unreal the power and shifts are crisp...love it.

Anyone had any luck with this style of mount? Photos?

Russellb · Postby **Russellb** » Wed Apr 12, 2006 11:11 pm

Hear is a photo of the prototype

Wotsa · Postby **Wotsa** » Wed Apr 12, 2006 11:20 pm

Nice werk Rus

Casey · Postby **Casey** » Wed Apr 12, 2006 11:41 pm

Wotsa wrote:Nice werk Rus

He's going to have to paint it bright pink or something to sell any

Russellb · Postby **Russellb** » Wed Apr 12, 2006 11:46 pm

When I work out how to stop the vibration I will get it powdercoated bright Red
At least it has some pink bits

Casey · Postby **Casey** » Wed Apr 12, 2006 11:51 pm

Russellb wrote:When I work out how to stop the vibration I will get it powdercoated bright Red
At least it has some pink bits

And the father-in-law can make the obligatory stickers :mrgreen:

Russellb · Postby **Russellb** » Wed Apr 12, 2006 11:57 pm

For your sake I hope someone dosn't read these post
Said something about your already planing our wedding :shock:

dv8one · Postby **dv8one** » Thu Apr 13, 2006 8:33 pm

Try using some angle iron (from the gearbox)and moving the bushes 'upright' (90 degrees from where you have them) for me this stopped the vibration. Making it like a conventional gearbox mount.