Brake rotor cover things

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
User avatar
maxwolfie
Racing Driver
Posts: 867
Joined: Mon Jan 24, 2005 6:22 pm
Vehicle: ND - 2 GT
Location: Western Sydney, NSW
Contact:
Contact maxwolfie

Brake rotor cover things

Postby maxwolfie » Fri Jan 27, 2006 1:31 pm

Hey guys, I'm pretty certain that my brake rotor cover things are causing all the rattling in my car..

Are these safe to remove/bend?
'89 JDM NA6 (black)
2" s/s ex., 4-2-1 extractors, high flow cat, RX-7 AFM + pod, lightened fly, h/d clutch, 2 way lsd, slotted rtrs, Racing beat type II front bar, Speedy 17" wheels
Top
User avatar
Bevan
Speed Racer
Posts: 2599
Joined: Tue Nov 16, 2004 8:18 pm
Vehicle: ND - 2 GT
Location: N-West Sydney

Postby Bevan » Fri Jan 27, 2006 1:33 pm

Yeah. They're just stone guards.
Take them off, see if noise goes away, if it doesn't chuck em back on! :) Let us know how you go.
Top
User avatar
maxwolfie
Racing Driver
Posts: 867
Joined: Mon Jan 24, 2005 6:22 pm
Vehicle: ND - 2 GT
Location: Western Sydney, NSW
Contact:
Contact maxwolfie

Postby maxwolfie » Fri Jan 27, 2006 3:16 pm

Cheers, I know alot of others have this prob too so I'll let ya's know

How hard are they to take off?
'89 JDM NA6 (black)
2" s/s ex., 4-2-1 extractors, high flow cat, RX-7 AFM + pod, lightened fly, h/d clutch, 2 way lsd, slotted rtrs, Racing beat type II front bar, Speedy 17" wheels
Top
User avatar
StanTheMan
Forum legend
Posts: 6824
Joined: Thu Apr 24, 2003 11:00 am
Vehicle: NA6
Location: Balgowlah

Postby StanTheMan » Fri Jan 27, 2006 5:25 pm

Taking them off is easie.....set of wire cutters.
I believe the wheel bearing needs to be removed to get it off in one Piece.
1 look & you will know.
pretty sure thats how it is. maybe you can confirm this.
Satans Ride called F33nix the resurrected NA6
Top
User avatar
Russellb
RIP Nov 2014
Posts: 692
Joined: Sat Aug 13, 2005 9:22 pm
Vehicle: Clubman
Location: Harden NSW
Contact:
Contact Russellb

Postby Russellb » Fri Jan 27, 2006 5:56 pm

To remove Stone guards first remove wheel then remove brake caliper
then slip the disc off . take the dust cap off the center of the hub . undo the wheel bearing nut . slip off hub then undo 3 10mm head bolts remove
stone guard assemble in revese order . front wheel bearing torque is
123- 159 ft-lb 167 - 216 Nm should take 1/2 hr per corner
Top
Post Reply

Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 221 guests