Page 1 of 1
Broken Throttle Bodies on NA6..?
Posted: Sat Mar 23, 2013 6:34 pm
by Rorge
Hey guys,
I'm running a turbo NA6 I slapped together, and just wondered if many of you have suffered a broken throttle body on your NA6?
I've now broken 2 and just fitted my last spare so am wondering if it's a common thing and if there's any tricks to stop them breaking...?
Mine are snapping the shaft on one of the bolt joins in the middle of the butterfly.
Cheers, George.
Re: Broken Throttle Bodies on NA6..?
Posted: Sat Mar 23, 2013 11:49 pm
by ondman88
TOOOO MUCH POWER....
No I don't know but someone will.
See you tomorrow George,
Andre
Re: Broken Throttle Bodies on NA6..?
Posted: Sun Mar 24, 2013 12:16 am
by Rorge
Hahaha surely you didn't think it was tooooo much power?
I think another 40-50 kw and we're looking pretty good!
Don't forget your helmet and long sleeves! I'll come spectate between my hillclimb laps!
Re: Broken Throttle Bodies on NA6..?
Posted: Sun Mar 24, 2013 12:43 pm
by NitroDann
Its kind of common, as in, it happens. Which is too common for a throttle failure.
the one Ive seen on a 1.6 involved an incorrectly adjusted throttle pedal stop, which I bet is very very common.
Full throttle max's the cable and yanks on the TB.
Dann
Re: Broken Throttle Bodies on NA6..?
Posted: Sun Mar 24, 2013 10:07 pm
by Rorge
Yeah I think I'll look at the stop points etc Dann, cheers for the tip!
I broke the last one the day before Cooma, and this one the day before our local Hillclimb! Glad I ironed out the bugs first.. (other than that bloody alternator!)
Re: Broken Throttle Bodies on NA6..?
Posted: Fri Jun 21, 2013 11:39 pm
by Rorge
Oops broke another one!
Re: Broken Throttle Bodies on NA6..?
Posted: Sun Jun 23, 2013 7:34 pm
by Boyracer
Me too, I ordered a Skunk 2 billet throttle body, will see how that goes.
Mine is a worked NB engine, no turbo.
Re: Broken Throttle Bodies on NA6..?
Posted: Thu Jun 27, 2013 4:37 pm
by Boyracer
Really nice bit of gear, will be fitting it next week
Re: Broken Throttle Bodies on NA6..?
Posted: Fri Jun 28, 2013 11:20 pm
by Rorge
I LIKE that throttle body. Think i'll buy one as a spare for when this one breaks!
(in saying that i've adjusted my pedal stop and accounted for the amount of flex in the mount so she should be alright now I HOPE..
Re: Broken Throttle Bodies on NA6..?
Posted: Fri Jun 28, 2013 11:27 pm
by Rorge
So am I right in thinking the 1.8 Shunk2 Throttle Body won't fit on an NA6 intake manifold..?
I'm at the point of considering making my own manifold, this might be the turning point..
Anyone noticing any decent gains from a nice plenum similar to what the skyline fags etc put on theirs?