Page 1 of 1
mx5 se ecu removal
Posted: Sat May 21, 2011 12:06 pm
by billybunter
hi
any-one removed their ecu on the se and where/how do you go about the removal.
thanks graham
Re: mx5 se ecu removal
Posted: Sat May 21, 2011 1:02 pm
by mx52nv
WARNING! Please make spare copies of your key through Mazda (they will need to code it) as you will not be able to make any more copies if the factory PCM is no longer connected. The issue is that the key sends a signal to the factory PCM. Not having the factory PCM will also cause a red light to flash continously on the dash. A WA SE owner with a fully built engine, custom turbo kit and an aftermarket ECU has lost one of his keys and is unable to make any more copies as he cannot return the car back to factory due how far he has gone with his car. Mazda is happy to help code a new key but they require the factory PCM to be connected and the car started. This is simply not an option when you have built engine with a different fuel, ignition setup and alternator.If you are only planning to remove it temporarily and return it unmolested then ignore my warning.
All NB ECUs are located in passenger footwell below the carpet and metal cover.
Les
Re: mx5 se ecu removal
Posted: Sat May 21, 2011 10:14 pm
by Lokiel
See 2nd post of
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=41091&start=75WARNING: Be careful when removing the cover plate, it's sharp (I got a nasty cut the first time I removed it - now it gets a lot of respect).
Re: mx5 se ecu removal
Posted: Mon May 23, 2011 11:54 pm
by billybunter
to les and lokiel
thanks for the info
Re: mx5 se ecu removal
Posted: Mon May 30, 2011 7:09 pm
by Russellb
mx52nv wrote: A WA SE owner with a fully built engine, custom turbo kit and an aftermarket ECU has lost one of his keys and is unable to make any more copies as he cannot return the car back to factory due how far he has gone with his car. Mazda is happy to help code a new key but they require the factory PCM to be connected and the car started. This is simply not an option when you have built engine with a different fuel, ignition setup and alternator.If you are only planning to remove it temporarily and return it unmolested then ignore my warning.
All NB ECUs are located in passenger footwell below the carpet and metal cover.
Les
Easy FIX
Just get a normal Key cut tell the locksmith you only want the key to unlock the door (IF HE TELL YOU THE KEY IS CODED )
I know this works have don it to the SE Rally Car