mx5cartalk.com

Would anyone have the AVO wiring diagram on where and how to plug in the Link-Turbolink ECU on a NB8A?
I purchased a new loom ready to plug in from AVO lastyear but they could'nt find the diagram and said it was easily findable on the net Been lookin for a while but no luck.

The loom has got all the plugs on it ready to be plugged in.

Also- Need the diagram on exactly where to tap the sump for the oil return

Any help would be great

Cheers,Mark

might be in this as it looks to contain a collection of AVO MX5 docs:
http://www.pdfoo.com/mazda/231-11203-pdf.html

think the file you're after is: miata_a4_small.pdf

also found this install with pics on an '90 model:

http://www.turbomagazine.com/tech/turp_ ... index.html

http://www.turbomagazine.com/tech/turp_ ... to_01.html

Not sure if the AVO turbo kits require the sump to be tapped in a specific place, such as provided by 93_Clubman...but check out the Flyinmiata install guide. It provides some good information.

http://www.flyinmiata.com/support/instr ... turbos.pdf

J.

Thanks SO much guys

Will look through them now and let ya know if its got what i need

Emailed AVO and never got anything back off them considering the amount of money ive spent with them

Cheers,Mark

The AVO Link wont work when i try to download it all i get is page not found....

The Flyin miata links are good and will help a bit but really need the info on the Turbolink which the AVO kit used and where exactly it plugs into on the 99 NB8A.

Thanks again for the help

Cheers,Mark

Instead of AVO had a look at Link & found this:
G27 - Mazda MX5 1999 Triggers and Ignition
http://www.linkecu.com/support/document ... l-drawings

Turbolink manuals might also help:
http://www.linkecu.com/products/Ancilla ... /TurboLink