mx5cartalk.com

anyone out there who has the skills to tune EMS ... ? ? i have no cable or laptop and my car is servirly out of tune ... any help would be greatly appreciated and rewarded with a carton and lunch and cash if need be ... im in brisbane ... im running bigger injectors and a fair sized turbo and all the needed components ... thanks in advance guys

little dissapointed with the lack of support here guys ... i have helped a few ppl on this site and thought it might have been a useful tool to get some things done but no replys is a little slack ....

when i was on the zx fourm they helped all the time ... im not being a smart ass just dissapointed

Hi:
What sort of aftermarket management system are you running.
Send me a pm and I will give you contact details of someone locally who should be able to help you.
CHeers Novice1

You might want to post your request in the general forum Eunos - I don't think a lot of the guys read this section. Also you're after some fairly specific help, and I don't personally know anyone here with an EMS (I assume this is an ECU brand??), so you may be up against it.

As you're in Brissy I would get in touch with the QLD MX5 club and ask around - the guys up there are very helpful and accomodating.

Good luck!

I, can lend you laptop and cable if needed.
I, presume you have the software for the E.M.S
CHeers Novice1

eunos-roadster wrote:little dissapointed with the lack of support here guys ... i have helped a few ppl on this site and thought it might have been a useful tool to get some things done but no replys is a little slack ....

when i was on the zx fourm they helped all the time ... im not being a smart ass just dissapointed

Firstly, I presume you are looking for someone else other than the authorised dealer in Queensland - KP Performance?

Secondly, have you approached Danny or Richard at your local MX5 Plus to see if they can recommend anyone local?
If all else fails, PM me and I will check who else I know up there with a dyno.

Other than that... just chill mate - we are all here to help and may take a little time to respond but we will respond.

Les @ MX5 Shop

thanks guys i retract those comments as you have all just come to the party with help tonight .. and i do appreciate it thank you ....

the reason i need so much help is because i have no software or anything .... i bought the car and as it sat it needed tune/ some repairs its running a hitatchi turbo from the rx7 and front mount and big injectors .. all seems to have been done by a pro as radiator and intercooler are 'V' mounted and all looks factory ....im sorry to be a pain but im just so used to working on cars with a spanner not a lap top and worried the drama is going to be more servire then just tuning .... everyone has advised me that its just timming and running super ritch ... (thats what i hope ) ... borrowing a cable and laptop would be awesome if possible but i still have no clue what to do with it lol ... i can get software from EMS as a download .. thanks for your replys

Find a local tuner who will do it on a dyno for you otherwise it will never be any good. Perhaps PM some of the QLD racers who will know of such people in the brissy area.

hi eunos
give john or rob at brisbane tunuing a call his number is 33931588
he has the fastest mx5 turbo in aus he should be able to help.
regads
GA

gaz47 wrote:hi eunos
give john or rob at brisbane tunuing a call his number is 33931588
he has the fastest mx5 turbo in aus he should be able to help.
regads
GA

If, you are recommending John at the Gabba, I would say stay as far away from him as you can, unless you like your car thrashed by his mechanics in their lunchbreaks.
Cheers Novice1