Page 1 of 2

MX5 Mania Drift Day 14th Dec 07

Posted: Wed Oct 17, 2007 2:40 pm
by MxJadeMonkey
MX5 Mania are holding a drift day at E/Creek on the Friday 14th December 07


There are two sessions only at this stage with only 13 positions available for each session (so 26 in total for the day)

this is a first in best dressed basis (no favourites)
SO FIRST TO PAY GETS THE SPOTS

The cost:

$155 per person inc gst
payment is needed before 15th November


The session times:

session one 9am till 1pm
session two 1pm till 5pm

You will have full instruction at the event by Joel Nielson and his crew from Drift school *(QLD)*

http://www.sdt.com.au/DRIFT.htm

Wet circuit will apply and speeds of around 80 to 90km will be reached
all care is taken and tyre wear is minimal!!!!

Please contact Josh @ Mania on (02) 94823238

There may be a possibility of a Saturday Arvo 15th Dec as well depending on interest

Please note, you will be using your own mx5 and an LSD while beneficial is not essential (wet surface = sideways action)



:mrgreen:

Also Spectators most welcome on the day
the more pics the better

Cheers Josh

Posted: Wed Oct 17, 2007 4:32 pm
by MxJadeMonkey
By the way Guys and Girls


Feel free to ask any questions on here as well


Cheers Josh

Posted: Wed Oct 17, 2007 9:11 pm
by marcusus
Hmmm... I'm supposed to be on pager support for that week, but I can probably convince someone to hold onto it for me for the day.

Will come up to Mania at some stage to confirm / see what you guys have new up there.

Posted: Wed Oct 17, 2007 9:18 pm
by Alex
Is there an age limit, the web site link you posted says
\"Participants must be over 21 or have completed a Defensive Driving Course\"

I am not and have not
will this be an issue?

more questions
I guess this is the track being used? http://www.eastern-creek-raceway.com/skid_circuit.htm

are helmets required/supplied?

Posted: Thu Oct 18, 2007 10:44 am
by Benny
Please book me in for the morning session Josh.

Where do I send the cheque?

Posted: Thu Oct 18, 2007 11:43 am
by MxJadeMonkey
Hi,

No age limit or any of that stuff as it is not using their cars (we are using our own mx5's)

and yes that is the track we will be using, i have done this before and i had so much fun, it was unreal!


George,

Please send check to

MX5 Mania
unit 2, 8a Kookaburra Rd
Hornsby heights
NSW 2077

as soon as i recieve it i will book you for the morning session
Thanks Josh

Places are filling up fast guys.

Posted: Thu Oct 18, 2007 2:26 pm
by nfs13b
I have a couple of questions.... having never drifted before

Do you need to have a manual

Would a large turbo just make it pointless

is a minispool ok

etc etc

Basically if I enter the drag car will it be pointless

Posted: Thu Oct 18, 2007 2:29 pm
by Babalouie
Ya, spool + big turbo would make it pretty horrible mate. It would mainly understeer a lot but occasionally throw in some random unpredictable oversteer just to keep you on your toes :D

Posted: Thu Oct 18, 2007 3:18 pm
by MxJadeMonkey
Hey Mate,

Mini spool would be fine

auto or manual is no issue either

massive turbo will make it more of a task but also if you like a challenge?

over steer will not be an issue either as this track pretty much makes you do it with out trying to hard, the fun comes from trying to control it once it's there mate.

Cheers, Josh

Posted: Thu Oct 18, 2007 3:38 pm
by Babalouie
BTW here's some pics from an event we had at the same skid circuit, but we ran it in the dry
Image

Image

Image

It's much slipperier in the wet :D

Cheque'll be in the mail tomorrow Josh :D

Posted: Thu Oct 18, 2007 5:18 pm
by MxJadeMonkey
Nice to hear mate,

i look forward to seeing your drift style

Posted: Thu Oct 18, 2007 5:27 pm
by Ajay
for anyone who wants to see my yellow car slide uncontrollably everywhere do the arvo session :D

Re:

Posted: Thu Oct 18, 2007 5:53 pm
by Babalouie
mx5_boy wrote:for anyone who wants to see my yellow car slide uncontrollably everywhere do the arvo session :D


Remember...a drift is like an angry dog. If you show fear, it will bite you. So don't show any fear! :D

Posted: Fri Oct 19, 2007 9:51 am
by EGG80X
I'll see if I can take that day off work.....

then I'll get the welder ready muhahahahahahhaha

Posted: Fri Oct 19, 2007 10:02 am
by metris
...no CAMS required?

If theres a 15th December session I will definately be there!!!

Otherwise i'll try my darndest but i am at the mercy of my employer...

:evil: FIFTHEENTH!!!!!!!!!!!!!!! :mrgreen: