Page 1 of 10

Brisbane Detailing/Dyno Combo Day - 24th August 2013.

Posted: Wed Jun 05, 2013 11:33 pm
by Crapweasel
Ok Guys,

Seeing as we had a good turnout for 18th May, and everyone seemed to have a good time - be it having their pride and joy renewed, or just to come along and socialise a little, I've decided to organise another one.

This time though, we have a twist, as the guys at GT Auto, who are onsite with Automotive plus are willing to do dyno runs for us, price will depend on how many people we have, so there's a "group buy" on the table straight away.

$110.00 per run if we have less than 10 cars, or $88 for more than 10.

It will be a good opportunity to either get a grasp on how you're going vs stock for the mods you've done, or set a baseline for mods you want to do.

If you could register your interest for just the dyno testing at this stage then I'll get in touch with the hosts to set a suitable date for both detailing hosting and dynoing and start a new thread with confirmed details. I'm thinking 27th July at this stage, just to give an idea, but can shift around if there's something big I'm missing on this day that means a lot of people miss out who would attend otherwise.

Detailing details (heh) will be put forward in the next thread.

Dyno runners:
1 - Crapweasel

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 12:17 am
by sailaholic
Great idea, I'm away till the 29th and my car doesn't run reliably enough at the moment to sign up though.

Sent from my GT-I9100 using Tapatalk 2

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 6:45 am
by Gladiator
Interested in the detailing but not the Dyno. I don't need to spend $100 to find out my car is slow. :lol:

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 8:27 am
by plohl
1 - Crapweasel
1 - plohl (dependent on engine at the time - should have more of idea after the 20/6)

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 8:57 am
by Magpie
1 - Crapweasel
1 - plohl (dependent on engine at the time - should have more of idea after the 20/6)
1 - Magpie (provided it is after 27/07 as I will not have it, therefore between 28/07 and 01/08, however my engine maybe rpm limited or between 17/08 and 22/08)

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 1:50 pm
by stinkyjim
+1 for both

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 2:12 pm
by TTT
Can attend to detail again.

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 2:34 pm
by tuned_to_fly
Interested in the dyno session.

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 2:44 pm
by jackmack
Count me in for both....date is no issue so will be there

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Thu Jun 06, 2013 2:50 pm
by corners
I may be interested in Dyno depending on cost.

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Fri Jun 07, 2013 12:26 am
by Timbo
keen to see how little power my car has but I can't guarantee anything. I get back from europe on the 26th or 27th :/

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Fri Jun 07, 2013 5:09 am
by gslender
Maybe....

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Fri Jun 07, 2013 7:54 am
by zero00
Pete

Not worried about the power of either but keen to bring the NB for 'detail' but will only slot in if spare space available seeing I had the NA done last time

Sounds good and great to see Automotive Plus/GT Auto Garage assisting - may even bring the 86 down and have a talk to the guys at GT Auto about the titanium dual exhaust replacment for my 86

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Fri Jun 07, 2013 11:15 am
by Novice1
Detailing Yes.

Dyno just to watch.

Novice1

Re: Brisbane Detailing/Dyno Combo Day - EOI for numbers

Posted: Fri Jun 07, 2013 11:48 am
by MINX
I am keen to see if some one can make some small swirls disappear from where my magnet uhf antenna has scratched.

Have current dyno so detail only.