Dan's NC2 Track Car
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Dan's NC2 Track Car
After selling my last NC 2 years ago (thread - viewtopic.php?f=57&t=53973) I just got myself an NC2 as a new track/fun car to go with the Boxster S I still have which is more of a road car.
This time I went with an NC2 rather than an NC because the price difference isn't huge and the better transmission shift fork + looks. I ended up paying a slight premium on what I wanted to pay in order to get one locally and low km's (81km) after having a disappointing experience with one I was going to buy interstate a while back and being a bit impatient but I'm happy just to get back into an MX5.
I have an OEM hardtop already purchased to put onto the car as well as the old TC105N wheels I had from my old car to use as track wheels, I just need to make a decision about the coilovers (Ohlins or MCA's again), find myself a 4.1 diff and then I'll start hitting the track in it as a relatively stock MX5 to start having some MX5 fun.
I'm not planning to go as crazy with this one as I did last time but time will tell.. will keep this thread updated with progress. Hope to see some familiar faces around at the track soon
This time I went with an NC2 rather than an NC because the price difference isn't huge and the better transmission shift fork + looks. I ended up paying a slight premium on what I wanted to pay in order to get one locally and low km's (81km) after having a disappointing experience with one I was going to buy interstate a while back and being a bit impatient but I'm happy just to get back into an MX5.
I have an OEM hardtop already purchased to put onto the car as well as the old TC105N wheels I had from my old car to use as track wheels, I just need to make a decision about the coilovers (Ohlins or MCA's again), find myself a 4.1 diff and then I'll start hitting the track in it as a relatively stock MX5 to start having some MX5 fun.
I'm not planning to go as crazy with this one as I did last time but time will tell.. will keep this thread updated with progress. Hope to see some familiar faces around at the track soon
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
- Luke
- Racing Driver
- Posts: 781
- Joined: Sat May 23, 2009 1:11 am
- Vehicle: NC
- Location: Wetherill Park NSW
Re: Dan's NC2 Track Car
Hey Dan
How soon before we see you back at club track days and NSW super sprints???
Out of curiosity did you ever give the Porsche a go on any track?
EDIT:
GET RID OF THOSE UGLY YELLOW PLATES PRONTO!!!
How soon before we see you back at club track days and NSW super sprints???
Out of curiosity did you ever give the Porsche a go on any track?
EDIT:
GET RID OF THOSE UGLY YELLOW PLATES PRONTO!!!
2022 BRZ 10AE
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes
-
- Racing Driver
- Posts: 750
- Joined: Mon Jul 29, 2013 8:47 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
Looks really nice.
That hard top will look good on that colour.
That hard top will look good on that colour.
NB8A| WP 1:15.6 | SMP-S 1:08.56 | SMP-N 1:21.35
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
- mx5002
- Racing Driver
- Posts: 561
- Joined: Mon Nov 26, 2012 7:36 pm
- Vehicle: NB8B
- Location: southwest sydney
Re: Dan's NC2 Track Car
Dan wrote:I'm not planning to go as crazy with this one as I did last time but time will tell.. will keep this thread updated with progress. Hope to see some familiar faces around at the track soon
see you in mx5cup soon
GREEN ITB'd NB8B
SMSP south 1.04.30 SMSP GP 1:53:12 SMSP Brabham 2.21.11
Marulan 47.01
Wakefield 1.09.64
SMSP south 1.04.30 SMSP GP 1:53:12 SMSP Brabham 2.21.11
Marulan 47.01
Wakefield 1.09.64
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
Luke wrote:Hey Dan
How soon before we see you back at club track days and NSW super sprints???
Out of curiosity did you ever give the Porsche a go on any track?
EDIT:
GET RID OF THOSE UGLY YELLOW PLATES PRONTO!!!
Hey Luke,
Yellow plates will be gone today and I'd say I'll be back for the SMSP South day as a first outing, might get down to a trackschool day or something before that though.
Regarding the Porsche I only went out to 1 track day at Wakefield (Porsche club day) where I only did 12 laps as I had an incident when a car spun in front of me at turn 2 so I decided just to run my car off road which was a pretty rough off given how messed up the turf is there. I didn't do any significant damage but I decided to not do any more laps that day since I didn't feel like going out in big run groups in that car. I was going to go out with Nuddy in December to one of the open pit Track School days to see what it can really do but it was raining so I decided not to go.
It did a low 1:10 easily on old stock tyres and I think with R specs plus some practice it could do a 1:05 or 1:06 pretty easily but I just don't have the money to push it to it's limit given how expensive it is to replace if I was to bin it. Porsche make some amazing cars and I'm constantly impressed when I drive it thinking about just how good it is as a package out of the box as the suspension tuning is good enough to daily and sublime in the corners!
The MX5 definitely has something the Porsche doesn't in that you feel like you are closer to the car since the Porsche is almost too clinical. Driving home yesterday I was thinking how much I've missed my MX5..
At least I got a pic on the track
Last edited by Dan on Wed Mar 13, 2019 11:48 am, edited 2 times in total.
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
Snowmotion wrote:Looks really nice.
That hard top will look good on that colour.
Yeh I think so as well, going to go put it on tonight I think. Need the Missus to give me a hand to lift it on.
mx5002 wrote: see you in mx5cup soon
hahaha, will probably see you at the next round
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
- Custardtart
- Racing Driver
- Posts: 700
- Joined: Mon Aug 08, 2016 1:48 pm
- Vehicle: NC
- Location: Brisbane
Re: Dan's NC2 Track Car
If you go Öhlins I’d be interested in a comparison?
NC1 - 2.5 opposite lock device
Lakeside 62.3
Lakeside 62.3
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
Custardtart wrote:If you go Öhlins I’d be interested in a comparison?
Will do, I already ordered the Ohlins. Mid May is the delivery estimate as they are currently out of stock.
Based on some research I've done and my past experience I think i'm going to buy some different springs to experiment with a sightly lower front bias while keeping it within reasonable bounds for the stock valving.
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
-
- Driver
- Posts: 37
- Joined: Wed Apr 18, 2018 2:48 pm
- Vehicle: NC
Re: Dan's NC2 Track Car
Hey dan, where did you source this extremely hard to find hardtop? And how much if you don’t mind
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
bliu6757 wrote:Hey dan, where did you source this extremely hard to find hardtop? And how much if you don’t mind
Sent from my iPhone using Tapatalk
I put a WTB ad up on this forum and snowmotion reached out as he found one for me. He was amazing and even brought it to me so I can't thank him enough!! It was 2.5k including the fitting kit in the end.
I looked for a long time to get one for my last NC and ended up buying a carbon fibre one for that car so even though I didn't have a car yet this time I purchased the hardtop knowing how much of a pain they are to buy.
Good luck in the search!
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
The hardtop is on, It's so much nicer than the carbon one I had on my last car with the factory seals and roof liner.
I was originally thinking that I'll get it repainted to match and have the rear bumper repainted at the same time but I think the contrast looks good.
I was originally thinking that I'll get it repainted to match and have the rear bumper repainted at the same time but I think the contrast looks good.
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
-
- Racing Driver
- Posts: 750
- Joined: Mon Jul 29, 2013 8:47 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
Looks great. Like it is the soft top, not the hard top with the contrast colour.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
NB8A| WP 1:15.6 | SMP-S 1:08.56 | SMP-N 1:21.35
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
NC1| WP 1:09.42 | SMP-S 1:03.191 | SMP-N 1:16.1856 | SMP-GP 1:48.288
- Luke
- Racing Driver
- Posts: 781
- Joined: Sat May 23, 2009 1:11 am
- Vehicle: NC
- Location: Wetherill Park NSW
Re: Dan's NC2 Track Car
Leave it black. You can sell it seperately to the car later on real easy if it is black as it goes with any colour.
2022 BRZ 10AE
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes
2021 GR Yaris
2008 Peugeot HDi Lemans, Number 1027/2000, White with Red stripes
- Dan
- Racing Driver
- Posts: 789
- Joined: Fri Jun 08, 2012 9:27 pm
- Vehicle: NC
- Location: Sydney
Re: Dan's NC2 Track Car
Yeh I'm liking the black but I think if it was matching it might look better, have asked for a quote to paint it and the bumper to see how much it will be then make a decision.
Have made a decision on the spring rates on the Ohlins, I ordered some Ohlins 5kg rear springs so that it will be 7kg/5kg. While it's softer than the 10kg/7kg setup I ran on my last NC the relative rates F/R are similar and it should avoid the car tending towards understeer which I think the out of the box rates are intended to do.
I have gone with Whiteline Sway bars as well. At one point I thought about going with the common RX8 Red/Yellow combo or racing beats but looking through the different specs the Whiteline's sit in between the RX8 Red and Yellow sway bars for the front in terms of stiffness and the same specs as the RX8 Orange in the rear but with adjustability so I can tune the balance.
Here was the chart I used if anyone was curious:
Have made a decision on the spring rates on the Ohlins, I ordered some Ohlins 5kg rear springs so that it will be 7kg/5kg. While it's softer than the 10kg/7kg setup I ran on my last NC the relative rates F/R are similar and it should avoid the car tending towards understeer which I think the out of the box rates are intended to do.
I have gone with Whiteline Sway bars as well. At one point I thought about going with the common RX8 Red/Yellow combo or racing beats but looking through the different specs the Whiteline's sit in between the RX8 Red and Yellow sway bars for the front in terms of stiffness and the same specs as the RX8 Orange in the rear but with adjustability so I can tune the balance.
Here was the chart I used if anyone was curious:
2009 NC2 - Ohlins (7kg/5kg), Whiteline Sways, Weds TC105N (17x8), OEM Hardtop & 2009 987.2 Boxster
- Custardtart
- Racing Driver
- Posts: 700
- Joined: Mon Aug 08, 2016 1:48 pm
- Vehicle: NC
- Location: Brisbane
Re: Dan's NC2 Track Car
Be interested in how you go with the sways. I found the rx8 front arb totally overpowered the Bilstein/Eibach set up I used to run.The understeer was horrendous on track. They weren’t adjustable which didn’t help.
My research seemed to suggest very stiff springs and the oem sways is the way to go. I’m running 12/6 now and feel the handling balance spot on but was told by a few people to go 16/9!!! My car does road duties too so that’s too stiff for me and more importantly Mrs Tart!
My research seemed to suggest very stiff springs and the oem sways is the way to go. I’m running 12/6 now and feel the handling balance spot on but was told by a few people to go 16/9!!! My car does road duties too so that’s too stiff for me and more importantly Mrs Tart!
NC1 - 2.5 opposite lock device
Lakeside 62.3
Lakeside 62.3
Who is online
Users browsing this forum: No registered users and 15 guests