Minhtam's NB8B Build - Meet Bev :)

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy

User avatar
minhtam
Driver
Posts: 46
Joined: Thu May 02, 2013 7:51 pm
Vehicle: NB8B
Location: Sydney

Minhtam's NB8B Build - Meet Bev :)

Postby minhtam » Thu Jul 11, 2013 9:10 pm

Hellooo my names Minhtam and I have recently picked up an bright red NB8B aka my second mrs, Bev :D

I was on the market for a new car, I read up a lot on MX-5's and how much fun they were to drive, and was in my budget too, with a large amount of aftermarket support it was clear I wanted to own one myself.

I decided on an NB8B because of a few reasons, I wanted a car a bit newer than the traditional NAs, as much as I like the look of nicely modified NAs :). So, I was able to narrow it down to an NB8A or an NB8B, or NB8C. NB8A looked good and were relatively cheaper then the Series 2 models, although the front bumper just wasn't to my liking, so I focused on purchasing an NB8B. All the little extra's made me opt for a series 2+ model, increase chassis stiffness, different steering wheel, fog lights, different stockers and a different engine.

But more on that another time, I was on carsales/gumtree/eBay a lot on the hunt for an NB8B, it had to be stock, under 150,000 km's, well maintained, and in overall good condition inside and out. Over a fair while I went to look at a few MX5s around the Sydney area, the second I got into an MX5 for the first time and was taken for a test drive it was awesome! Smooth power output, suspension wasnt too soft even from stock, inside was nice and 'cosy', and most importantly, it handled like it was on rails ! Loved it, and definitely knew it was what I wanted.

Enough of the chit chats, a few inspections blah blah blah. I picked up a surprisingly clean red 2000 NB8B :D.

Here's what she looked like in carsales :

Image

Image

Image

I've owned her for a couple months now and so far I am loving it, I picker her up 100% stock so was stoked, I've made little touches, a few mods here and there since she has been in my ownership to make it a little more personalised to me. I'm looking forward to learning more about these cars and getting more into the MX5 community :)

Thanks for reading,
Minhtam.
Track Stance NB8B Garage Thread: viewtopic.php?f=57&t=58930&start=0

User avatar
minhtam
Driver
Posts: 46
Joined: Thu May 02, 2013 7:51 pm
Vehicle: NB8B
Location: Sydney

Re: Minhtam's NB8B Build - Meet Bev :)

Postby minhtam » Thu Jul 11, 2013 9:22 pm

Any idea how to upload the photos so they just show up :)
Track Stance NB8B Garage Thread: viewtopic.php?f=57&t=58930&start=0

User avatar
shuey
Racing Driver
Posts: 1014
Joined: Tue Jan 22, 2013 3:23 pm
Vehicle: NB8B
Location: Melbourne, Victoria

Re: Minhtam's NB8B Build - Meet Bev :)

Postby shuey » Thu Jul 11, 2013 9:43 pm

... ah, so that's where this little red NB8B went. It was priced pretty nicely and I was even considering shipping it over to Melbourne. Congrats on the purchase and welcome to the obsession!
2001 Sunlight Silver NB8B - SOLD - 23/6/16 :frown:

marty085
Racing Driver
Posts: 706
Joined: Wed Jun 22, 2011 10:08 pm
Vehicle: NA8
Location: Blakehurst NSW

Re: Minhtam's NB8B Build - Meet Bev :)

Postby marty085 » Thu Jul 11, 2013 10:13 pm

ImageUploadedByTapatalk1373541136.218729.jpg


ImageUploadedByTapatalk1373541160.097959.jpg


ImageUploadedByTapatalk1373541183.307273.jpg
You do not have the required permissions to view the files attached to this post.

User avatar
PaulF
Racing Driver
Posts: 1807
Joined: Fri Jan 28, 2011 5:55 pm
Vehicle: NA6
Location: Newcastle, NSW

Re: Minhtam's NB8B Build - Meet Bev :)

Postby PaulF » Thu Jul 11, 2013 10:55 pm

minhtam wrote:Any idea how to upload the photos so they just show up :)
Flickr generates the IMG codes for you, just copy and paste:
Image

User avatar
minhtam
Driver
Posts: 46
Joined: Thu May 02, 2013 7:51 pm
Vehicle: NB8B
Location: Sydney

Re: Minhtam's NB8B Build - Meet Bev :)

Postby minhtam » Thu Jul 11, 2013 11:00 pm

shuey wrote:... ah, so that's where this little red NB8B went. It was priced pretty nicely and I was even considering shipping it over to Melbourne. Congrats on the purchase and welcome to the obsession!


Ahh yes, you must've seen it too. It was a great pick up for the price and sweet talking the seller a bit helped too ;)

Oh okay I see, thanks for the help guys.

Something I put at the top of my to-do list after I picked up Bev was to go for a text book scenic drive on a beautiful sunny spring day down Wollongong Grand Pacific drive, it was perfect weather and I was absolutely loving it ! Car felt great and it felt so good to have the top down and just to go for a weekend drive.

Image
2817 by minhtamt, on Flickr

More updates coming soon, including coilovers, wheels, and a few bits and pieces.
Track Stance NB8B Garage Thread: viewtopic.php?f=57&t=58930&start=0

mazmad
Racing Driver
Posts: 1854
Joined: Fri Jul 06, 2012 4:02 pm
Vehicle: NC
Location: Sydney
Contact:

Re: Minhtam's NB8B Build - Meet Bev :)

Postby mazmad » Fri Jul 12, 2013 6:03 pm

Great choice of mx5 model :D Colour could be green but I suppose red is ok.

User avatar
minhtam
Driver
Posts: 46
Joined: Thu May 02, 2013 7:51 pm
Vehicle: NB8B
Location: Sydney

Re: Minhtam's NB8B Build - Meet Bev :)

Postby minhtam » Mon Jul 15, 2013 8:29 pm

mazmad wrote:Great choice of mx5 model :D Colour could be green but I suppose red is ok.


haha, red was not my first choice of colour but it came up and i couldnt refuse, green isnt so bad i guess!

Although the car was fine and freshly serviced, during inspection my friend and I noticed a few faults that would require fixing. One was the usual browning of the radiator, not a big deal although not wanting to risk a cracked radiator and overheating in the middle of a spirited drive i quickly sought to purchasing a replacement. Changed that over and filled her up with some fresh coolant and it was all sweet. On the same weekend I got the other small issue fixed up, some oil residue around the engine blocks head. Small fix again, just bought an OEM rubber head gasket from MX5 Mania, took off the head and swapped it over. Gave the engine a good decreasing and problem solved :). Definitely gave me peace of mind that my radiator was solid, and that there was no more engine oil leaking out around the head.

On another note, a few weeks after picking up Bev, I was on the hunt for a set of coilovers straight away. I could not stand the stock height..
Shopped around a bit, considered Yellow Speed coilovers, BC BR's, and a few others. I stopped by Otomoto in North Parramatta one day originally looking to buy a set of Nemoto Sprints in 15x8 +5. Speaking to the guys there I also asked if they had any coilovers for Bev in stock, surprisingly they had HSD Coilovers in stock. So we were able to negotiate a good price, so I picked up both the HSD Coilovers and the Nemotos Sprints!

Driving my MX5 there, there was no way I would fit a full set of wheels and a big box with the coilovers in... drove to my girlfriends house to get her car, did a bit of research on the HSD brand to see if they were ok and it looked all good. So, proceeded to head back there a bit later and picked it all up.

Image
2888 by minhtamt, on Flickr

HSD Coilovers in 8kg front and 6kg rear.

Image
2938 by minhtamt, on Flickr

and the Nemoto Sprints in 15x8 +5
Track Stance NB8B Garage Thread: viewtopic.php?f=57&t=58930&start=0

User avatar
monty007
Fast Driver
Posts: 109
Joined: Tue Jan 15, 2013 10:06 pm
Vehicle: NB SE
Location: Adelaide

Re: Minhtam's NB8B Build - Meet Bev :)

Postby monty007 » Mon Jul 15, 2013 10:04 pm

Great example of a very clean MX5, welcome and I am looking forward to the mods 8)
2004 SE

User avatar
mx5002
Racing Driver
Posts: 561
Joined: Mon Nov 26, 2012 7:36 pm
Vehicle: NB8B
Location: southwest sydney

Re: Minhtam's NB8B Build - Meet Bev :)

Postby mx5002 » Wed Jul 17, 2013 12:39 pm

Hurry up and fit that sh!t......
Can't wait to see those wheels n offset.
GREEN ITB'd NB8B
SMSP south 1.04.30 SMSP GP 1:53:12 SMSP Brabham 2.21.11
Marulan 47.01
Wakefield 1.09.64 :D

User avatar
slimx
Fast Driver
Posts: 474
Joined: Sun Mar 13, 2011 1:12 pm
Vehicle: NB8B - Turbo
Location: Sydney (Sth West)
Contact:

Re: Minhtam's NB8B Build - Meet Bev :)

Postby slimx » Sun Jul 21, 2013 2:45 am

Car's looking great buddy, should definitely get some seats for yourself though!

User avatar
Kev05
Racing Driver
Posts: 1456
Joined: Sat May 19, 2012 11:24 pm
Vehicle: NB8A
Location: Brisbane

Re: Minhtam's NB8B Build - Meet Bev :)

Postby Kev05 » Sun Jul 21, 2013 8:53 am

Great looking NB, good choice of colour.
Nice looking set of rims, I've been watching a few on eBay, cheap but wrong offset for me.

User avatar
minhtam
Driver
Posts: 46
Joined: Thu May 02, 2013 7:51 pm
Vehicle: NB8B
Location: Sydney

Re: Minhtam's NB8B Build - Meet Bev :)

Postby minhtam » Sun Jul 21, 2013 10:13 pm

Kev05 wrote:Great looking NB, good choice of colour.
Nice looking set of rims, I've been watching a few on eBay, cheap but wrong offset for me.


Same, I've constantly checking forums/ebay/gumtree for a good set of wheels to come up. What specs are you ideally looking for?

slimx wrote:Car's looking great buddy, should definitely get some seats for yourself though!


Thinking about it ! Maybe Recaro or Bride seats? Adjustable ones though, not a fixed back..

UPDATE

Got the coilovers fitted :D, car rides so much better with them on and the ability to adjust the height and damper is a big plus.

Image
2891 by minhtamt, on Flickr

Winded the coilovers almost all the way down when they got put in.. man, it was so low. The tyres would already be touching the splash guards. Drove it down the street scraping and scrubbing so raised it back up not long after.

Image
2913 by minhtamt, on Flickr

Raised up a bit, but not yet at an equal height but lowered all around to just tucking the tyres.

Image
2917 by minhtamt, on Flickr

My steering was slightly off after the coilover install so went and got a wheel alignment the day after.
Track Stance NB8B Garage Thread: viewtopic.php?f=57&t=58930&start=0

User avatar
shuey
Racing Driver
Posts: 1014
Joined: Tue Jan 22, 2013 3:23 pm
Vehicle: NB8B
Location: Melbourne, Victoria

Re: Minhtam's NB8B Build - Meet Bev :)

Postby shuey » Sun Jul 21, 2013 10:24 pm

whoa.. how low (mm) does your car sit right now? it does seem as low as meanmx's one. i personally find it hard to driving that low with all the scrubbing and scrapping. but nonetheless, your build thread is looking good. any potential upgrades on the engine performance side?
2001 Sunlight Silver NB8B - SOLD - 23/6/16 :frown:

User avatar
minhtam
Driver
Posts: 46
Joined: Thu May 02, 2013 7:51 pm
Vehicle: NB8B
Location: Sydney

Re: Minhtam's NB8B Build - Meet Bev :)

Postby minhtam » Sun Jul 21, 2013 10:30 pm

shuey wrote:whoa.. how low (mm) does your car sit right now? it does seem as low as meanmx's one. i personally find it hard to driving that low with all the scrubbing and scrapping. but nonetheless, your build thread is looking good. any potential upgrades on the engine performance side?


It was pretty low, you know all the strut bars under the our NB8Bs? they were a few centimetres above the ground when the wheels were put on, I couldn't even drive on a straight road without scratching something, or something hitting the road... speed humps were impossible to get over without making a scene haha. But it looked mad :P. In terms of engine mods, been looking at an intake, not too sure about the rest. Putting on a turbo kit would give these cars so much more of a kick!


A week or so after the coilovers, the Nemoto Sprints got some rubber put on.

Image
2940 by minhtamt, on Flickr

Image
2947 by minhtamt, on Flickr

Nemoto Sprints 15x8 + 5 on Nankang 185/45/15.

Image
2942 by minhtamt, on Flickr

A few photo's if you need to know how the wheel and tyre specs fit on a NB. Keep in mind my car wasn't lowered enough, there was still a two finger gap in the front, and the back I think.

Image
2943 by minhtamt, on Flickr

Image
2944 by minhtamt, on Flickr

Image
2945 by minhtamt, on Flickr

Being pretty low already on the stock 16s, and putting 15's on with small and stretched tyres, I forgot about how much lower it would be to the ground and well..

Image
2941 by minhtamt, on Flickr

Did some landscaping :(

Thanks for reading, more updates coming soon :)
Track Stance NB8B Garage Thread: viewtopic.php?f=57&t=58930&start=0


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 230 guests