From Mexie ... to MXSE ...
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: From Mexie ... to MXSE ...
That she is guys
Did a quick search around on these caps and looks like omgpham sells them and has the best price Sent him a quick query and should be ordering them soon.
Now then .... there was another upgrade done a few weeks ago, and I hadn't posted anything until I'd really tried it out and got a real feel for it and wanted to be sure I hadn't wasted my money ...
There was a lot of thought went into this - I've dríven myself nuts for ages over it Having finally made the decision and gone down this path all I can say is I'm extremely comfortable with it and am absolutely wrapped with the results! The cost was not that significant in the realm of car mods and even if I did decide to go a more radical route down the track, something I have came to strongly doubt, it would not worry me having spent this. Until that time comes, if ever, I have a much, much nicer car to drive than what I had a few weeks ago! In fact I now really love this car!! I seriously cannot believe just how good the car feels now. Rather than drive to suit my car, I now drive my car!!
It was a very happy time finally being able to remove the no longer required TPS resistor and the FM02 module
Following several communications with Lachlan at Chiptorque, he tuned it for me ready for a downpipe/exhaust upgrade and for 11psi boost and at last the car is now tuned to suit the already fitted BEGi TBI and CAI, FMIC and Denso 321cc injectors. He said it will run just fine on the factory boost that I am quite happy with, but it is tuned for 11psi. All I can say is the way it feels on factory boost through the gears to 7000rpm is freakin awesome and I can't wait to fit the GFB mbc I purchased a while ago to see what the extra power feels like!
Now I know I'll probably cop some flack over going this way. I know this is not a perfect fix, it's a "best possible" without the car actually present to tune. But all I can say is it's pretty damned good, in fact better than I'd expected, and believe me I am so bloody happy with this and most importantly with my crazy psyche it feels so right for me and that means I will stay happy with the car.
To finish I'll add this as well, after today's drive and without me prompting in any way, my wife said she could really feel the difference in the way the car felt and said it was money well spent!! WINNER!!
Today, was just a bloody good day all round ........
Did a quick search around on these caps and looks like omgpham sells them and has the best price Sent him a quick query and should be ordering them soon.
Now then .... there was another upgrade done a few weeks ago, and I hadn't posted anything until I'd really tried it out and got a real feel for it and wanted to be sure I hadn't wasted my money ...
There was a lot of thought went into this - I've dríven myself nuts for ages over it Having finally made the decision and gone down this path all I can say is I'm extremely comfortable with it and am absolutely wrapped with the results! The cost was not that significant in the realm of car mods and even if I did decide to go a more radical route down the track, something I have came to strongly doubt, it would not worry me having spent this. Until that time comes, if ever, I have a much, much nicer car to drive than what I had a few weeks ago! In fact I now really love this car!! I seriously cannot believe just how good the car feels now. Rather than drive to suit my car, I now drive my car!!
It was a very happy time finally being able to remove the no longer required TPS resistor and the FM02 module
Following several communications with Lachlan at Chiptorque, he tuned it for me ready for a downpipe/exhaust upgrade and for 11psi boost and at last the car is now tuned to suit the already fitted BEGi TBI and CAI, FMIC and Denso 321cc injectors. He said it will run just fine on the factory boost that I am quite happy with, but it is tuned for 11psi. All I can say is the way it feels on factory boost through the gears to 7000rpm is freakin awesome and I can't wait to fit the GFB mbc I purchased a while ago to see what the extra power feels like!
Now I know I'll probably cop some flack over going this way. I know this is not a perfect fix, it's a "best possible" without the car actually present to tune. But all I can say is it's pretty damned good, in fact better than I'd expected, and believe me I am so bloody happy with this and most importantly with my crazy psyche it feels so right for me and that means I will stay happy with the car.
To finish I'll add this as well, after today's drive and without me prompting in any way, my wife said she could really feel the difference in the way the car felt and said it was money well spent!! WINNER!!
Today, was just a bloody good day all round ........
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: From Mexie ... to MXSE ...
If you know that you can be happy with ~150rwkw, and that you wont be doing any further power modz (larger turbo/exhaust/injectors), the Chiptorque solution is a very cost-effective way to go (and probably the most legal).
I'm surprised though that they didn't recommend upgrading the injectors.
321cc injectors are about the largest that the OEM ECU can handle properly and they normally recommend upgrading to 440cc injectors (probably not an issue if you don't intend to track the car or thrash it).
I'm surprised though that they didn't recommend upgrading the injectors.
321cc injectors are about the largest that the OEM ECU can handle properly and they normally recommend upgrading to 440cc injectors (probably not an issue if you don't intend to track the car or thrash it).
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: From Mexie ... to MXSE ...
Yeah Lachlan at Chiptorque bought up quite a few considerations (like the injectors) during our communications that I hadn't thought of prior to starting the process.
In the end, my wants came down to:
As everyone knows with the SE, as power upgrades are made, the ecu just gets more and more cantankerous and driving enjoyment suffers. Mine only had the BPV, TBI, CAI and FMIC upgrades. While I wouldn't say the few mods I'd made had created a monster tune to drive, and it certainly didn't feel as bad as some mention their car becomes, it certainly had facets that annoyed the crap out of me and were affecting my enjoyment of the car. The idle had become uneven and inconsistent both cold and warm. The car would not run smoothly on any steady speed, it would constantly baulk and surge - 25kph zones especially became stressful! Backing off the throttle at any revs - but got worse as revs rose - it would give a jerk on backoff as if I'd hit the brakes. Acceleration was uneven on light throttle but would become much worse as harder throttle applied, and hesitations through the rev range was awful. The way the turbo would come on was at first fun (this is my first turbo car ever) but that novelty soon wore off as I started to "use" the car's power more and realised how sudden and short lived that boost was.
Having mucked around on and off with the mbc, I always ended up happier just removing it and sticking with the factory boost. Adding any extra boost to the above issues just magnifies the negatives.
Main use and future goals. My personal view on the SE is that I really don't think it's a bad car in completely stock form, and when I first purchased this car, my aim was to just enjoy it for what it is. I need it to be easy to drive and in stock form it ticked that. I like good fuel economy and the SE certainly ticks that. I enjoy sufficient power to suit my (pretty placid these days) driving style and the SE ticks that. It must be reliable and it ticks that. We want it capable of enjoyable weekends away or extended holidays and it certainly ticks that. So prior to the upgrades all was good. However, I was being completely delusional in thinking I was ever going to leave it alone in factory form with so much information available on how easy it is to implement "simple" upgrades for what is a more than reasonable power increase. Having then upgrading those, it inevitably leads to the well publicised issues and so I had to do something to get back the "easy to drive" aspect.
Why not the "better" way - ecu and tune? Well, there it is, the $64K question ... and tbh I don't think I can fully answer that, or let's say not in a way that everyone will/may understand. I'll do my best. To begin, let's just quickly answer Lokiel's 150rwkw comment - yup! I'm happy with that - very happy! As I mentioned, it's already tuned ready for the exhaust and that is the last of the upgrades I want as far as power goes. It wasn't a massive outlay - around the cost of my CAI - so I am not going to stress about that aspect. The new chip can be reprogrammed down the track for further mods at very reasonable cost so not all is lost there anyway. I have had many cars in my past that had so much more useable power than could ever possibly be used (legally) on speed limited roads, and I always ended up frustrated with them to the point I'd invariably sell them purely due to that frustration and then regret it later. Mexie completely changed my thinking on power. Having to really drive that car to get the best from it (well at my very limited level anyway ) was a revelation. But despite this, I'd still started sliding down these upgrades to the SE. I'd unfortunately forgotten the lesson I'd learned and was heading down my old path and into Lokiel's "MOAR POWA" and it wasn't until I received some very good advice and constructive and relevant comparisons, that I was saved from myself and what would undoubtedly have been a big mistake for the way my confusing brain works and what I would have accepted long term and been able to live with. In the final analysis and after a great deal of research, consultation and thinking, the Chiptorque upgrade suits me perfectly and has (thank goodness!) proven itself right for me.
I am not interested in hp numbers, dyno sheets, traffic light drags etc etc - been there done that over it. As I mentioned earlier, if after I finally fit the DP/exhaust and raise boost to 11psi I have around 150rwkw, I'm already happy now below that, so power wise then I'll be ecstatic I want an enjoyable car that I can live with every day, that does what I want reliably and economically and that I don't second guess myself with every time I want to drive it. I had that in factory form, I didn't have that with the upgrades, I have it back in spades with the upgrades and this chip - BUT not so much that it has lost that turbo fun feel and that "have to drive it to get the best from it" relationship.
So may as well give a review of my ideas of the chip upgrade. Remember, at the moment it's still running factory DP/Exhaust and factory boost/ebc ... The difference was noticeable immediately on the very first startup after I'd re-fitted the ecu. Instantly on cold start the idle was smooth and constant! Engine cold running it is let's say 99% smooth, there's a sort of an old fashioned but extremely minor carby choke type hesitation, but it's so minimal it's insignificant and not a concern - I'm being harshly critical to pick on it at all as a fault. I can't recall if the car had that when stock or not so maybe. Once warm, it feels much more responsive to the throttle than before and it cruises at any speed beautifully smoothly and holds speeds better. Put the foot down even slightly and there's better response and more power immediately than before and there's noticeably more power right through the rev range through to the 7000rpm soft cut. There's no hesitations, bogs or cuts anywhere in any gear at either soft or hard throttle input. The fun turbo kick remains, but it is much smoother and more controllable than the harsh crazy kick it was before, even in factory form. There is no longer the mass black residue on the exhaust outlet I was getting after every drive due to the bigger injectors (in hindsight fitting those at that stage was a mistake). I stayed with these as I may very well remain factory boost and even on 11psi are sufficient and economical.
I will add that had I been doing this say 5-10 years ago, I would no doubt have gone a completely different way. If I still had my enthusiasm for learning new computer programmes and skills, I would have devoured the chance to fit an ecu with a decent tuning program and learned how to tune the car. But I just don't have that enthusiasm anymore. This chip is fit and forget. It affects nothing apart from the tune. It's worry free and I like that.
So I hope that sort of explains my decision.
Oh ... and the $$$ I've saved?? ... well, there's the DP/exhaust .... if I could just find some 15's I like ... hmmm, did someone mention MCA's ....
In the end, my wants came down to:
As everyone knows with the SE, as power upgrades are made, the ecu just gets more and more cantankerous and driving enjoyment suffers. Mine only had the BPV, TBI, CAI and FMIC upgrades. While I wouldn't say the few mods I'd made had created a monster tune to drive, and it certainly didn't feel as bad as some mention their car becomes, it certainly had facets that annoyed the crap out of me and were affecting my enjoyment of the car. The idle had become uneven and inconsistent both cold and warm. The car would not run smoothly on any steady speed, it would constantly baulk and surge - 25kph zones especially became stressful! Backing off the throttle at any revs - but got worse as revs rose - it would give a jerk on backoff as if I'd hit the brakes. Acceleration was uneven on light throttle but would become much worse as harder throttle applied, and hesitations through the rev range was awful. The way the turbo would come on was at first fun (this is my first turbo car ever) but that novelty soon wore off as I started to "use" the car's power more and realised how sudden and short lived that boost was.
Having mucked around on and off with the mbc, I always ended up happier just removing it and sticking with the factory boost. Adding any extra boost to the above issues just magnifies the negatives.
Main use and future goals. My personal view on the SE is that I really don't think it's a bad car in completely stock form, and when I first purchased this car, my aim was to just enjoy it for what it is. I need it to be easy to drive and in stock form it ticked that. I like good fuel economy and the SE certainly ticks that. I enjoy sufficient power to suit my (pretty placid these days) driving style and the SE ticks that. It must be reliable and it ticks that. We want it capable of enjoyable weekends away or extended holidays and it certainly ticks that. So prior to the upgrades all was good. However, I was being completely delusional in thinking I was ever going to leave it alone in factory form with so much information available on how easy it is to implement "simple" upgrades for what is a more than reasonable power increase. Having then upgrading those, it inevitably leads to the well publicised issues and so I had to do something to get back the "easy to drive" aspect.
Why not the "better" way - ecu and tune? Well, there it is, the $64K question ... and tbh I don't think I can fully answer that, or let's say not in a way that everyone will/may understand. I'll do my best. To begin, let's just quickly answer Lokiel's 150rwkw comment - yup! I'm happy with that - very happy! As I mentioned, it's already tuned ready for the exhaust and that is the last of the upgrades I want as far as power goes. It wasn't a massive outlay - around the cost of my CAI - so I am not going to stress about that aspect. The new chip can be reprogrammed down the track for further mods at very reasonable cost so not all is lost there anyway. I have had many cars in my past that had so much more useable power than could ever possibly be used (legally) on speed limited roads, and I always ended up frustrated with them to the point I'd invariably sell them purely due to that frustration and then regret it later. Mexie completely changed my thinking on power. Having to really drive that car to get the best from it (well at my very limited level anyway ) was a revelation. But despite this, I'd still started sliding down these upgrades to the SE. I'd unfortunately forgotten the lesson I'd learned and was heading down my old path and into Lokiel's "MOAR POWA" and it wasn't until I received some very good advice and constructive and relevant comparisons, that I was saved from myself and what would undoubtedly have been a big mistake for the way my confusing brain works and what I would have accepted long term and been able to live with. In the final analysis and after a great deal of research, consultation and thinking, the Chiptorque upgrade suits me perfectly and has (thank goodness!) proven itself right for me.
I am not interested in hp numbers, dyno sheets, traffic light drags etc etc - been there done that over it. As I mentioned earlier, if after I finally fit the DP/exhaust and raise boost to 11psi I have around 150rwkw, I'm already happy now below that, so power wise then I'll be ecstatic I want an enjoyable car that I can live with every day, that does what I want reliably and economically and that I don't second guess myself with every time I want to drive it. I had that in factory form, I didn't have that with the upgrades, I have it back in spades with the upgrades and this chip - BUT not so much that it has lost that turbo fun feel and that "have to drive it to get the best from it" relationship.
So may as well give a review of my ideas of the chip upgrade. Remember, at the moment it's still running factory DP/Exhaust and factory boost/ebc ... The difference was noticeable immediately on the very first startup after I'd re-fitted the ecu. Instantly on cold start the idle was smooth and constant! Engine cold running it is let's say 99% smooth, there's a sort of an old fashioned but extremely minor carby choke type hesitation, but it's so minimal it's insignificant and not a concern - I'm being harshly critical to pick on it at all as a fault. I can't recall if the car had that when stock or not so maybe. Once warm, it feels much more responsive to the throttle than before and it cruises at any speed beautifully smoothly and holds speeds better. Put the foot down even slightly and there's better response and more power immediately than before and there's noticeably more power right through the rev range through to the 7000rpm soft cut. There's no hesitations, bogs or cuts anywhere in any gear at either soft or hard throttle input. The fun turbo kick remains, but it is much smoother and more controllable than the harsh crazy kick it was before, even in factory form. There is no longer the mass black residue on the exhaust outlet I was getting after every drive due to the bigger injectors (in hindsight fitting those at that stage was a mistake). I stayed with these as I may very well remain factory boost and even on 11psi are sufficient and economical.
I will add that had I been doing this say 5-10 years ago, I would no doubt have gone a completely different way. If I still had my enthusiasm for learning new computer programmes and skills, I would have devoured the chance to fit an ecu with a decent tuning program and learned how to tune the car. But I just don't have that enthusiasm anymore. This chip is fit and forget. It affects nothing apart from the tune. It's worry free and I like that.
So I hope that sort of explains my decision.
Oh ... and the $$$ I've saved?? ... well, there's the DP/exhaust .... if I could just find some 15's I like ... hmmm, did someone mention MCA's ....
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
Re: From Mexie ... to MXSE ...
Kev, I've just been through a similar thought process. While talking to Dann about a tune, I asked for a quote on a twistmount setup and for about a week all I could think about was if going from a possible 220-230whp to 260-265whp is worth the cost.
Man it's tempting! POWA! I was very distracted all week.
Ultimately, I decided it's not for me just yet. I daily the car, and I rarely get into full throttle as it is, not even too often on a mountain blast. Maybe I'm just too accustomed to driving around the ECU's short comings? But the only place I'd make good use of the power would be the track, and I only get out there once or twice a year (and I've got a lot to learn before more power is needed!).
I went for a mountain run yesterday, and that cemented it for me, the car was fast enough in most situations as it is, so a good tune and I'll be laughing. The bump to 220ish whp will be enough for me for now, and I still won't even tap all of that very often. I know eventually I'll succumb to MOAR POWA, but for now that money can be better spent on new wheels
I'm glad to hear you're happy with the Chiptorque, and glad the missus is liking it too! Enjoy
Man it's tempting! POWA! I was very distracted all week.
Ultimately, I decided it's not for me just yet. I daily the car, and I rarely get into full throttle as it is, not even too often on a mountain blast. Maybe I'm just too accustomed to driving around the ECU's short comings? But the only place I'd make good use of the power would be the track, and I only get out there once or twice a year (and I've got a lot to learn before more power is needed!).
I went for a mountain run yesterday, and that cemented it for me, the car was fast enough in most situations as it is, so a good tune and I'll be laughing. The bump to 220ish whp will be enough for me for now, and I still won't even tap all of that very often. I know eventually I'll succumb to MOAR POWA, but for now that money can be better spent on new wheels
I'm glad to hear you're happy with the Chiptorque, and glad the missus is liking it too! Enjoy
-
- Racing Driver
- Posts: 1531
- Joined: Thu Nov 11, 2010 4:54 pm
- Vehicle: NB SE
- Location: orange nsw
Re: From Mexie ... to MXSE ...
nice write up. I think the chip was a good move. also appears they have improved it more since I had mine fitted 3 plus years ago and I was very happy then.
on another note I have got over my silly selling campaign of the white knight and it's quite possible I will upgrade the power even further to 350 rwhp or better after all it cost big $$$ to get to the 300rwhp and after that its just play money - I might as well exploit it
on another note I have got over my silly selling campaign of the white knight and it's quite possible I will upgrade the power even further to 350 rwhp or better after all it cost big $$$ to get to the 300rwhp and after that its just play money - I might as well exploit it
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: From Mexie ... to MXSE ...
"POWA!" to males is what "SALE!" is to our wives ... temporary insanity
I have a long history of getting carried away with what is available and what I see others doing and not properly or rationally considering what I actually want for myself! Most often what I really want is easily summed up with "keep it simple". Every time I over complicate it, and end up I can't deal with it.
I have probably spent the last year going through what everyone is doing or has done and all the various options and outcomes available. The good aspect of going through this process is the mass of information available, the methods to achieve it and the different results from each path taken. When it comes down to it, with some rational thinking, there really is no excuse to make a misinformed decision
I went from factory, to basic upgrades, to reduced driving enjoyment and then to following the different paths of fixing it. But each of those paths lead to different temptations to different levels of improvement and it's all soooooo tempting. I thought long and hard about buying billybunter's bolt ons he offered up at such a bargain. It was just the thought of the engine work required to suit the extra power and the $$$ in the end. I now know that after the initial novelty of all that power that I'd rarely ever use, I'd eventually start thinking of the $$$ I'd spent and other factors and I'd slide down a path of negativity and end up hating the car. At that stage I don't rationalise simply putting it back to stock, or any other level back to satisfaction, it's all over in my head. Been there, done that, not a pretty ending.
As is usual, our wives are often the best source of common sense in these situations ... if we listen. I didn't listen. Luckily, I also didn't take action! Every time I came to a "sort of" decision in my head, I hesitated when the time came to take it further. That hesitation was always enough I'd end up thinking down another path and this crazy thoughts/decision/lack of action process went on and on. My wife kept reminding me what I'd done in the past and to stop "wanting what everyone else has" and "think about what I want". If I'd listened, I'd have had this chip a year ago and would have enjoyed a much nicer car for that much longer I have since jokingly asked her why that really good rational thinking of hers for my situation vacates on the simple sighting of the word SALE! ... thaaaaat's a mistake to do just btw
We are at a stage in our lives where there's a lot of $$$ considerations and thinking going on about what we want to be able do in the coming years, so the $$$ difference between the way I've gone and even the basic option of just an ecu and tune certainly became a big part of my final decision. When I eventually came back down to earth with my thinking, I finally worked out what I don't want, rather than what I thought I wanted! I then knew what I really wanted, and I knew which way to go.
This route would not suit everyone. There's a huge number of variables need to be considered. I've mentioned that in my opinion it's not a big cost in the scheme of mods, but that's also because I now know for certain that if I was to ever go further with upgrading hp much further there's no way it will happen within a few years time period, so this spend will easily pay for itself in my case.
But I must say, this chip is so much better than I expected that I reckon if Mazda had only improved the engine's breathing a bit and implemented a similar tune as standard, the SE's reputation for performance would be at a whole different level!!
I have a long history of getting carried away with what is available and what I see others doing and not properly or rationally considering what I actually want for myself! Most often what I really want is easily summed up with "keep it simple". Every time I over complicate it, and end up I can't deal with it.
I have probably spent the last year going through what everyone is doing or has done and all the various options and outcomes available. The good aspect of going through this process is the mass of information available, the methods to achieve it and the different results from each path taken. When it comes down to it, with some rational thinking, there really is no excuse to make a misinformed decision
I went from factory, to basic upgrades, to reduced driving enjoyment and then to following the different paths of fixing it. But each of those paths lead to different temptations to different levels of improvement and it's all soooooo tempting. I thought long and hard about buying billybunter's bolt ons he offered up at such a bargain. It was just the thought of the engine work required to suit the extra power and the $$$ in the end. I now know that after the initial novelty of all that power that I'd rarely ever use, I'd eventually start thinking of the $$$ I'd spent and other factors and I'd slide down a path of negativity and end up hating the car. At that stage I don't rationalise simply putting it back to stock, or any other level back to satisfaction, it's all over in my head. Been there, done that, not a pretty ending.
As is usual, our wives are often the best source of common sense in these situations ... if we listen. I didn't listen. Luckily, I also didn't take action! Every time I came to a "sort of" decision in my head, I hesitated when the time came to take it further. That hesitation was always enough I'd end up thinking down another path and this crazy thoughts/decision/lack of action process went on and on. My wife kept reminding me what I'd done in the past and to stop "wanting what everyone else has" and "think about what I want". If I'd listened, I'd have had this chip a year ago and would have enjoyed a much nicer car for that much longer I have since jokingly asked her why that really good rational thinking of hers for my situation vacates on the simple sighting of the word SALE! ... thaaaaat's a mistake to do just btw
We are at a stage in our lives where there's a lot of $$$ considerations and thinking going on about what we want to be able do in the coming years, so the $$$ difference between the way I've gone and even the basic option of just an ecu and tune certainly became a big part of my final decision. When I eventually came back down to earth with my thinking, I finally worked out what I don't want, rather than what I thought I wanted! I then knew what I really wanted, and I knew which way to go.
This route would not suit everyone. There's a huge number of variables need to be considered. I've mentioned that in my opinion it's not a big cost in the scheme of mods, but that's also because I now know for certain that if I was to ever go further with upgrading hp much further there's no way it will happen within a few years time period, so this spend will easily pay for itself in my case.
But I must say, this chip is so much better than I expected that I reckon if Mazda had only improved the engine's breathing a bit and implemented a similar tune as standard, the SE's reputation for performance would be at a whole different level!!
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: From Mexie ... to MXSE ...
KevGoat wrote::
But I must say, this chip is so much better than I expected that I reckon if Mazda had only improved the engine's breathing a bit and implemented a similar tune as standard, the SE's reputation for performance would be at a whole different level!!
Agreed.
If Mazda produced a 135rwkw SE/MSM, which is VERY easy to do with just a CAI and increased boost level, they would have had a market-killer.
Unfortunately for the SE/MSM, Mazda had a new NC on the horizon so they couldn't risk harming its sales and they didn't want to cannibalise their RX market. The SE/MSM was crippled from the factory and only half-arsed.
Add a CAI, 2.5" exhaust, bump the boost, bigger injectors, real intercooler, aftermarket ECU (or Chiptorque flash), boost gauge, upgrade the 17" boat anchors to 15" or 16" rims and a roll bar and you've got an exceptional+reliable little convertible despite the tiny IHI turbo.
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: From Mexie ... to MXSE ...
Doesn't time fly when you're having fun?! ... Two year anniversary ownership of MXSE today
- bootz
- Racing Driver
- Posts: 887
- Joined: Thu Aug 19, 2010 1:13 pm
- Vehicle: NB8B
- Location: The Wild Wild West
Re: From Mexie ... to MXSE ...
Lokiel wrote:KevGoat wrote::
But I must say, this chip is so much better than I expected that I reckon if Mazda had only improved the engine's breathing a bit and implemented a similar tune as standard, the SE's reputation for performance would be at a whole different level!!
Agreed.
If Mazda produced a 135rwkw SE/MSM, which is VERY easy to do with just a CAI and increased boost level, they would have had a market-killer.
Unfortunately for the SE/MSM, Mazda had a new NC on the horizon so they couldn't risk harming its sales and they didn't want to cannibalise their RX market. The SE/MSM was crippled from the factory and only half-arsed.
Add a CAI, 2.5" exhaust, bump the boost, bigger injectors, real intercooler, aftermarket ECU (or Chiptorque flash), boost gauge, upgrade the 17" boat anchors to 15" or 16" rims and a roll bar and you've got an exceptional+reliable little convertible despite the tiny IHI turbo.
Which is of course why you spent your money on EFR.
Bootz and Boof - On the road to somewhere.
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
Re: From Mexie ... to MXSE ...
KevGoat wrote:Doesn't time fly when you're having fun?! ... Two year anniversary ownership of MXSE today
Congrats, Kev And in that 2 years you've definitely made MXSE "yours", and very nice too.
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: From Mexie ... to MXSE ...
Thanks ManiacLachy! Been keeping up to date on your's too and coming along nicely! You'd be enjoying that extra HP and Dann's tune!!
Couple of small updates ...
After some drama and chasing around for a month after ordering, my Jass Performance needle caps finally arrived!! Easy to fit, supposed to be just a push on, but the main dial caps were very loose so I had to put some adhesive on to hold them. Lokiel and Nevyn were right though, they really finish the look nicely!...
Then I recently picked up a BEGi Downpipe from Billybunter when he decided to sell his old parts. Gave it a quick clean up and I have some high heat exhaust paint in the cupboard so might spruce it up a bit more before fitting. I have to wait for some bits from BEGi before I can fit it anyway so may as well ...
Needs a nice NitroDann exhaust to finish it off at some stage ...
Couple of small updates ...
After some drama and chasing around for a month after ordering, my Jass Performance needle caps finally arrived!! Easy to fit, supposed to be just a push on, but the main dial caps were very loose so I had to put some adhesive on to hold them. Lokiel and Nevyn were right though, they really finish the look nicely!...
Then I recently picked up a BEGi Downpipe from Billybunter when he decided to sell his old parts. Gave it a quick clean up and I have some high heat exhaust paint in the cupboard so might spruce it up a bit more before fitting. I have to wait for some bits from BEGi before I can fit it anyway so may as well ...
Needs a nice NitroDann exhaust to finish it off at some stage ...
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
Re: From Mexie ... to MXSE ...
But then you need another Chiptorque refresh! However, better power and sounds
- KevGoat
- Speed Racer
- Posts: 3940
- Joined: Sun Jun 17, 2012 8:48 pm
- Vehicle: NB SE
- Location: Down South, Adelaide, SA
Re: From Mexie ... to MXSE ...
Nup - exhaust was allowed for in my specs/requirements. The chip can be re-tuned if necessary for a small charge if I do change anything else, but for now there's not much else I want to do power wise. The GFB mbc is fitted and adjusted to ~11psi and the extra power and ability to rev through the range in every gear over what it use to be like is great - plenty for my driving. Maybe for a change I'll just leave it alone for a while and just enjoy driving it ... we'll see ...
- ManiacLachy
- Forum Guru
- Posts: 3266
- Joined: Mon Jan 13, 2014 2:35 pm
- Vehicle: NB SE
- Location: Brisbane
- bruce
- Speed Racer
- Posts: 7706
- Joined: Fri Apr 25, 2003 11:00 am
- Vehicle: NA8 - Turbo
- Location: Victoria
- Contact:
Re: From Mexie ... to MXSE ...
I would consider heat wrapping the downpipe while it's off. Just don't do a Bruce and stuff it up (wrap is fiddly).
Who is online
Users browsing this forum: Google [Bot] and 233 guests