I've started a little project. Here is the Garage Vary front splitter being test fitted, prior to painting. It is a very good fit!
chris
LuckyCat's Project - NC2
Moderators: timk, Stu, zombie, Andrew, The American, Lokiel, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy
-
LuckyCat
- Fast Driver
- Posts: 392
- Joined: Mon Nov 07, 2011 6:14 pm
- Vehicle: NC
- Location: Blue Mountains
LuckyCat's Project - NC2
You do not have the required permissions to view the files attached to this post.
-
Sailor
- Racing Driver
- Posts: 1064
- Joined: Wed Jun 24, 2009 5:49 pm
- Vehicle: NC
- Location: Southie...NOT from " the Shire " :/.
Re: LuckyCat's Project - NC2
WoooHooo very nice
And no chance of damaging it at that height
And no chance of damaging it at that height
Rob
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
05 NCLE, Cosworth SC,PF01,Ohlins,Selby,GWR exh
"We're only given a tiny spark of madness.We mustn't lose it"(Robin Williams)
-
LuckyCat
- Fast Driver
- Posts: 392
- Joined: Mon Nov 07, 2011 6:14 pm
- Vehicle: NC
- Location: Blue Mountains
Re: LuckyCat's Project - NC2
Um...I'm not quite finished yet... 
c
c
-
PaulF
- Racing Driver
- Posts: 1812
- Joined: Fri Jan 28, 2011 5:55 pm
- Vehicle: NA6
- Location: Newcastle, NSW
-
NitroDann
- Forum sponsor
- Posts: 10280
- Joined: Thu Nov 05, 2009 12:10 pm
- Vehicle: NA6
- Location: Newcastle NSW
- Contact:
Re: LuckyCat's Project - NC2
I told him to watch out for this at the putty run..
Wont be long and it will be matte black with no windows lol.
Dann
Wont be long and it will be matte black with no windows lol.
Dann
http://www.NitroDann.com
speed wrote:If I was to do it again, I wouldn't even consider the supercharger.
-
Bizi
- Racing Driver
- Posts: 738
- Joined: Sat Apr 09, 2011 4:17 pm
- Location: Northern Sydney
Re: LuckyCat's Project - NC2
LuckyCat wrote:Um...I'm not quite finished yet...
c
Ohlins?
Check out the OMG, Ohlins thread, since you may be able to score a 'test' of a NC equipped with the best coilover line this side of a full race setup. Plus Guy is a good guy and his mods will tip you further over the edge... hehe.
-
Guy_Coles
- Racing Driver
- Posts: 507
- Joined: Thu Nov 18, 2010 1:27 pm
- Vehicle: NC
- Location: Sydney - Lower North Shore
- Contact:
Re: LuckyCat's Project - NC2
Bizi wrote:
Ohlins?
Check out the OMG, Ohlins thread, since you may be able to score a 'test' of a NC equipped with the best coilover line this side of a full race setup. Plus Guy is a good guy and his mods will tip you further over the edge... hehe.
HAHAHAHA.... I call it "Pandora's box....."
PM me if you want to take Macey out for a drive and have a look at her kit - she's been a work in progress for the last 2 years. I live on the Lower North Shore during the week and North of Hornsby (near Nemo) on weekends.
2006 Black NC Soft Top with lots of Mods -
WP: 1:12.26 , SMP South 1:106.25 - 11th outright in Victorian 6 Hour 2015
http://privasec.com.au//
WP: 1:12.26 , SMP South 1:106.25 - 11th outright in Victorian 6 Hour 2015
http://privasec.com.au//
-
LuckyCat
- Fast Driver
- Posts: 392
- Joined: Mon Nov 07, 2011 6:14 pm
- Vehicle: NC
- Location: Blue Mountains
Re: LuckyCat's Project - NC2
Oh well. I painted the bar covers to match the wheels.
Thought about matt black and removing the windows, but...some one has already done that.
Getting the covers off is pretty straight forward. The covers are specific for each side. I bought some spares off one of the guys on the forum.
chris
Thought about matt black and removing the windows, but...some one has already done that.
Getting the covers off is pretty straight forward. The covers are specific for each side. I bought some spares off one of the guys on the forum.
chris
You do not have the required permissions to view the files attached to this post.
-
PaulF
- Racing Driver
- Posts: 1812
- Joined: Fri Jan 28, 2011 5:55 pm
- Vehicle: NA6
- Location: Newcastle, NSW
-
LuckyCat
- Fast Driver
- Posts: 392
- Joined: Mon Nov 07, 2011 6:14 pm
- Vehicle: NC
- Location: Blue Mountains
Re: LuckyCat's Project - NC2
MX5 Plus rear muffler
You do not have the required permissions to view the files attached to this post.
-
LuckyCat
- Fast Driver
- Posts: 392
- Joined: Mon Nov 07, 2011 6:14 pm
- Vehicle: NC
- Location: Blue Mountains
Re: LuckyCat's Project - NC2
Then we add a set of these.
They are O.Z Racing Alleggerita HLT 17X7 ET49 imported from Italy. Each wheel is supplied with a hub ring and a tag indicating the weight.
In this case the wheels were 250g lighter than the OEM wheel.
A set of wheel nuts were also supplied, but they are heavy and I will be replacing them with something a lot lighter.
The tyre I chose was Kumho KU36 205/45/17. I have already dríven to Brisbane on these and II have to say they offer better comfort and grip in the dry than the RE050A, though they are noisier. But, driving most of the way to Brisbane with the top down, the tyre noise goes away .
c
They are O.Z Racing Alleggerita HLT 17X7 ET49 imported from Italy. Each wheel is supplied with a hub ring and a tag indicating the weight.
In this case the wheels were 250g lighter than the OEM wheel.
A set of wheel nuts were also supplied, but they are heavy and I will be replacing them with something a lot lighter.
The tyre I chose was Kumho KU36 205/45/17. I have already dríven to Brisbane on these and II have to say they offer better comfort and grip in the dry than the RE050A, though they are noisier. But, driving most of the way to Brisbane with the top down, the tyre noise goes away .
c
You do not have the required permissions to view the files attached to this post.
Who is online
Users browsing this forum: No registered users and 14 guests
