AUZJDM Project Ruby

Chat to do with your MX5/Miata/Eunos Garage Ride(s).

Moderators: timk, Stu, -alex, miata, StanTheMan, greenMachine, ManiacLachy, Daffy, zombie, Andrew, The American, Lokiel

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

AUZJDM Project Ruby

Postby AUZJDM » Tue Jul 19, 2011 10:16 pm

Hey Lads,
here is my Little Red 1998 MX5 NB AKA Ruby, I have only recently bought the car about 3 months ago and has on 80,000km's on the clock and was in very clean condition for its age and low Km's. The first mod sofar has been the restoration off a damaged hardtop picked up from MX5 Plus for $800, sofar have only spent $30 more in Araldyte and glue with some acrylic strips to patch it up to a stronger than factory finish.

Basic plans for the car is too go Red and Black theme for the mean time but I'am stilled kickin around at some 15x8 offset rims, its a pitty enkei don't make more aggressive offsets. I ordered my Brown Davis single roll bar from MX5 Centre today so hopefully should have it on the car by the weekend. It will be booked into the paint shop early next week to get a full respray in black on the hardtop and front window surrounds, very interested to see this!!. Having Lost my Liscence for 3 months gives me the added advantage off getting everything i want done without getting many K's up on the motor and not having too find time too get my car too the shop while I have work aswell.

Other plans for the moment are too sort out some BC racing Coilovers, front strut brace and rear stut braces with full sway bar and adjustable endlinks setup. I'am not sure what Look I'am after, Im just improving the handeling and cooling for the meantime, I do like the idea off the cold side fast forward superchargers, means I can run my own headers instead off worrying about wether or not they will fit under a charger. Will keep everyone posted. Cheers
You do not have the required permissions to view the files attached to this post.

davidau
Fast Driver
Posts: 149
Joined: Wed Aug 11, 2010 12:20 am
Vehicle: NA6
Location: Melbourne, VIC

Re: AUZJDM Project Ruby

Postby davidau » Wed Jul 20, 2011 7:45 am

AUZJDM wrote:Hey Lads,
here is my Little Red 1998 MX5 NB AKA Ruby, I have only recently bought the car about 3 months ago and has on 80,000km's on the clock and was in very clean condition for its age and low Km's. The first mod sofar has been the restoration off a damaged hardtop picked up from MX5 Plus for $800, sofar have only spent $30 more in Araldyte and glue with some acrylic strips to patch it up to a stronger than factory finish.

Basic plans for the car is too go Red and Black theme for the mean time but I'am stilled kickin around at some 15x8 offset rims, its a pitty enkei don't make more aggressive offsets. I ordered my Brown Davis single roll bar from MX5 Centre today so hopefully should have it on the car by the weekend. It will be booked into the paint shop early next week to get a full respray in black on the hardtop and front window surrounds, very interested to see this!!. Having Lost my Liscence for 3 months gives me the added advantage off getting everything i want done without getting many K's up on the motor and not having too find time too get my car too the shop while I have work aswell.

Other plans for the moment are too sort out some BC racing Coilovers, front strut brace and rear stut braces with full sway bar and adjustable endlinks setup. I'am not sure what Look I'am after, Im just improving the handeling and cooling for the meantime, I do like the idea off the cold side fast forward superchargers, means I can run my own headers instead off worrying about wether or not they will fit under a charger. Will keep everyone posted. Cheers


Nice car! I always think the best colour on an NB is red.
Hey you gotta put something on to shine that interior so it looks as sporty as the exterior!! :mrgreen:
Leave your worries in God's hands

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Wed Jul 20, 2011 6:00 pm

Thanks mate, yea the red looks alot better than i thought for th nb series thats for sure! the black roof gives it a bit more off a jap spec look aswell :lol: :JDM:

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Fri Jul 22, 2011 7:41 pm

Got the Brown Davis roll bar today, will be putting it on tomorrow :D

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Sat Aug 13, 2011 3:04 pm

Well its been a little while but after having difficulties with the brown davis roll bar not being up too my expectations my next stage was too send the car in for paint after i have got a new spec roll bar sorted out. I'am really pleased with the result sofar and i find the colour combo works really well. sorry for the bad pictures has been taken on my mobile phone in cloudy weather.
You do not have the required permissions to view the files attached to this post.

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Sun Jan 08, 2012 8:24 am

Hello all, its been awhile but a few things have changed on project Ruby as you can tell.... Got a set off BBS RG-F wheels, MX5 plus tall boy rol bar, Carbon fibre intake system, Rev9auto Front Lip. It's been a little it slow as I have had other commitments too my Mountain bike Riding but all good.

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Sun Jan 08, 2012 8:41 am

The car still needs more down low with Tien Coilovers but i'am pretty happy sofar.
You do not have the required permissions to view the files attached to this post.

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Re: AUZJDM Project Ruby

Postby hks_kansei » Sun Jan 08, 2012 8:47 am

Which lip did you get?

There aren't a huge amount out there for NB8A unfortunately.
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Sun Jan 08, 2012 8:51 am

I eneded up getting the Rev9auto oem spec one, I was after a lip that could give me a flat bottom surface if I ever put a flat racing splitter on it.

User avatar
plohl
Racing Driver
Posts: 1922
Joined: Wed Oct 14, 2009 12:13 am
Vehicle: NA8
Location: Brisbane

Re: AUZJDM Project Ruby

Postby plohl » Sun Jan 08, 2012 10:34 am

I see this car all the time haha. Looks pretty good dude.
Cheers,
plohl

User avatar
Bizi
Racing Driver
Posts: 738
Joined: Sat Apr 09, 2011 4:17 pm
Location: Northern Sydney

Re: AUZJDM Project Ruby

Postby Bizi » Sun Jan 08, 2012 10:51 am

I am looking forward to pics of the car with those beautiful BBS wheels!

User avatar
Suspense
Racing Driver
Posts: 635
Joined: Mon Apr 11, 2011 10:00 pm
Vehicle: NB8B
Location: Sydney

Re: AUZJDM Project Ruby

Postby Suspense » Sun Jan 08, 2012 12:22 pm

What intake is that and where from?

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Fri Feb 03, 2012 8:46 pm

Suspense wrote:What intake is that and where from?

I'am pretty sure Autoexe make a similar intake but the brand is Gruppe M.

AUZJDM
Fast Driver
Posts: 128
Joined: Fri Jun 10, 2011 10:45 pm
Vehicle: NB8A

Re: AUZJDM Project Ruby

Postby AUZJDM » Fri Feb 03, 2012 8:58 pm

Got some black and white pics up, look pretty good. :)
You do not have the required permissions to view the files attached to this post.


Return to “MX5 Garage Chat”

Who is online

Users browsing this forum: No registered users and 5 guests