mx5cartalk.com

Yeah. Me again

So dealing with my pop up issues I have found wiring diagrams which showed the pins on the headlight motor.




A is Ground
C is motor up
D is motor down

When i apply 12v to the pins i only hear a click.
This happens on both motors.

I am assuming the click is a internal relay switching but something is stopping the motors moving.

The headlights work with the manual winder.

Any help much appreciated.


Sent from my SM-N9005 using Tapatalk

Figured all this out.

The book fails to mention that 12v also need to be applied as a constant to another pin.

So 2 x 12v sources required.

All sorted and headlights work a treat!!

Sent from my SM-N9005 using Tapatalk