Page 1 of 1
NA6 Fuel Pump Relay - Where to buy?
Posted: Sat Dec 24, 2011 1:23 pm
by stowie_666
Mazda want a stupid amount of money for one, and google is only turning up UK results. Anyone know where you'd get one in Aus for a reasonable price?
Alternatively, anyone got one spare?
Re: NA6 Fuel Pump Relay - Where to buy?
Posted: Sat Dec 24, 2011 3:46 pm
by manga_blue
Take yours to a Mazda wrecker and compare it to a 323/Astina one.
Re: NA6 Fuel Pump Relay - Where to buy?
Posted: Sat Dec 24, 2011 4:15 pm
by tbro
Mate,
Make things easier on yourself and tell us where you are!!!!!!
If your in Brissy , you can borrow one.
Terry
Re: NA6 Fuel Pump Relay - Where to buy?
Posted: Sat Dec 24, 2011 5:03 pm
by stowie_666
Good idea, I'll have a look on Tuesday
I'm in Melbourne, looking for a more permanent solution though as mine decided it would try it's hardest to catch fire
Thanks for the offer!
Re: NA6 Fuel Pump Relay - Where to buy?
Posted: Mon Dec 26, 2011 3:13 pm
by 93_Clubman
Think you'll find many wreckers are closed until at least after NY day, e.g. AllMaz at Clayton are closed until 16 Jan. Don't about the Mazda wreckers at Dandenong & Seaford though. FWIW, you can also get those relays in good used condition off ebay if no one's open for a while.
Re: NA6 Fuel Pump Relay - Where to buy?
Posted: Tue Dec 27, 2011 4:42 pm
by stowie_666
No luck on the 323 relay, they're a four prong unit. Looking like I'll get the UK one, maybe try jury rigging it in the meantime.
From what I can tell, I may actually be better off with a modified 4 prong, as I don't believe the AFM safety device is still in use with a Megasquirt. Could explain why the original burnt out.
Re: NA6 Fuel Pump Relay - Where to buy?
Posted: Sat Feb 11, 2012 11:43 am
by spaztikcamel
I replaced it with a relay from supercheap.
its been working for 6 months.
specs:
5 pin
40amp
12v
it was like 12 bux from memory as opposed to any I could source that were $50+ and if you go down that route I can help you with the wiring.
it will require either cutting off the old connector or splicing the lines and soldering the wires directly onto the pins of the new relay.
goodluck and feel free to pm me for more info