quick question re: 2001 NB Crush Zone Sensor
Posted: Mon Sep 06, 2010 11:21 pm
I'm in the process of installing new airbags, seatbelts, SAS controller into my 2001 NB, and have a question re: the crush zone sensor, which appears in the 2001 model
I'm told this module (located in the centre of the radiator support near the bumper) rarely needs replacing, as only a very heavy impact activates it. There are only 2 states it can be in, either short circuit, or 820ohms. depending on whether it's triggered or not. Does anyone know, or in a position to measure the resistance of a known good NB crush zone sensor, to help me verify whether my one is a good unit? I was provided everything except this sensor when I bought the airbag system.
much appreciated
I'm told this module (located in the centre of the radiator support near the bumper) rarely needs replacing, as only a very heavy impact activates it. There are only 2 states it can be in, either short circuit, or 820ohms. depending on whether it's triggered or not. Does anyone know, or in a position to measure the resistance of a known good NB crush zone sensor, to help me verify whether my one is a good unit? I was provided everything except this sensor when I bought the airbag system.
much appreciated