Page 1 of 1

NB8A - Sensors relating to intake?

Posted: Wed Mar 31, 2010 10:28 pm
by hks_kansei
going to be installing a mania style CAI soon, and I've noticed an odd sensor there.

there's teh AFM, then in the top half of the airbox is a small sensor tapped in, just stuck in the side of the top half of the airbox (clean side)

what's this sensor? what does it sense?



my plan is to put a small bit of pipe just before my new intake and tap the sensor into the side of it (so the clean side of the filter once again)


edit:
here's a pretty bad pic, ignore the red and green, they were for a different question ages ago.

the sensor in question can be seen on the right hand side of the airbox, sticking out the side just near the snorkel.

http://img6.imageshack.us/img6/1098/dsc00652e.jpg

NB8A - Sensors relating to intake?

Posted: Wed Mar 31, 2010 11:58 pm
by sprx3
i cant tell by the photo but if its held in by a rubber grommet its an air temp sensor, black plastic about 3cm long & has a small ball thingy on the end (inner side)

drill new pipe add the grommet & push in the sensor :wink:

peice of cake

NB8A - Sensors relating to intake?

Posted: Thu Apr 01, 2010 9:47 am
by hks_kansei
yep, that sounds like it (I'll take it out and look for the ball to make sure)

awesome!

thanks mate.

NB8A - Sensors relating to intake?

Posted: Thu Apr 01, 2010 2:00 pm
by sprx3
anytime, will have to catch up at garage some time ;)

NB8A - Sensors relating to intake?

Posted: Fri Apr 09, 2010 11:39 am
by hks_kansei
quick question, doesthe sensor just pull out?

I gave it a good pull and it moved a bit but seemed to be caught like it had a lip on it, is it just a tight fit? or do I need to twist or something?

dont want to force it too much and break something.

NB8A - Sensors relating to intake?

Posted: Fri Apr 09, 2010 6:25 pm
by blehbear
Yeah just pull it out whilst giving it a bit of a twist and it should come right out.