NA6: How did you wire your aircon for Adaptronic
Posted: Wed Dec 23, 2009 10:42 pm
by nismo502
For those of you who did your own harness, how did you wire the aircon?
I am getting very weird problem whereby my aircon does not work for Fanspeed 2,3,4. Is it programming or wiring?
Thanks
NA6: How did you wire your aircon for Adaptronic
Posted: Wed Dec 23, 2009 11:56 pm
by c2888
http://www.miataturbo.net/forum/t20954/How to make your AC work again without the factory ecu, it's instructions for a megasquirt but the diagrams and ideas still apply.
Basically the ecu decides when you should get AC and completes the circuit when those conditions are met, I think it just drops AC out when you put your foot down and hit that last contact in the crude early style TPS or over a certain crank speed.
You could be nasty and chuck a scotchlock between the two wires if you don't care about spinning the compressor too fast.
NA6: How did you wire your aircon for Adaptronic
Posted: Thu Dec 24, 2009 8:09 am
by StanTheMan
I have the wiring loom from adaptronic. Mine does the same.
I think its in programming.
I noticed some Americans have a completely different setting......which I can't seem to get on auxiliary 7 & 8.
mine is set on auxiliary 3.