nb battery holder bolt
Posted: Wed Jun 25, 2008 10:56 pm
anyone know what size it is? mine snapped and while i am at the hardware store getting the removal tool, i'd like to get a replacement at the same time, cheers
mx5cartalk.com
Australia's biggest and best MX-5 forum!!
https://mx5.net.au/forum/
nb battery holder bolt
Page 1 of 1
Posted: Thu Jun 26, 2008 1:35 am
Ah, packs of bolts are cheap as chips. And you can never have too many! Go for 10mm heads with metric thread. Get 3 or 4. You'll find a use for the others one day!
Posted: Thu Jun 26, 2008 10:41 pm
kool, wont need them till the weekend now, the extractor screw snapped in the snapped bolt 
Posted: Sun Jun 29, 2008 4:43 pm
Start by spraying some penetrating lubricant like WD-40 on the bolt and leaving it 24 hours.
When I was at supercrap the other day they had a freeze spray (-42\"C I think it said), you could spray some of that on the bolt and see if that helps loosen it.
Good luck, snapped bolts really suck
When I was at supercrap the other day they had a freeze spray (-42\"C I think it said), you could spray some of that on the bolt and see if that helps loosen it.
Good luck, snapped bolts really suck
Posted: Wed Jul 02, 2008 5:34 pm
has anyone removed the actual battery clamp/battery terminal from the wire? i tried replacing mine, and it looks like it's been clamped together really tight on the wire 
no luck.. it has robbed me of my confidence haha
no luck.. it has robbed me of my confidence haha