Page 1 of 1
Power Window problems
Posted: Wed Oct 24, 2007 1:02 pm
by corners
Hey all
My power windows seem to get slower and slower day by day. In the past I have used silicon spray on another I owned and that would resolve the problem so long as I kept them lubricated.
What do you guys do with mx5 windows?
Cheers
Posted: Wed Oct 24, 2007 1:21 pm
by Juffa
There is a known problem where the window up/down switch contacts become dirty. You can pull the switch apart and clean the contacts. I am told this makes a big difference. If you do a search you should find more info as I seem to remember a recent post on this very subject.
J
Posted: Wed Oct 24, 2007 2:08 pm
by Dodgy Haro
Or if you go to the garage / tech section at Miata.net, someone did a write-up on taking apart the door trims to get to the window mechanisms and then trim-cutting the silicon 'ball' guides which let the windows slide easier in their railings.
I have done this mod and it seems to compensate for my worn motors somewhat.
Posted: Wed Oct 24, 2007 8:47 pm
by Mr_Q
Dirty switch contacts or old cables are the main culprits. Cleaning the switch is cheap, so should be the first thing to try. A new set of cables isn't too bad though (as far as car repairs go anyway).
