Immob and Alarm

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

love5
Driver
Posts: 82
Joined: Fri Jun 20, 2008 10:09 am
Vehicle: ND - 2 GT
Location: Gold Coast

Immob and Alarm

Postby love5 » Thu May 28, 2009 5:11 pm

I had a mongoose system fitted (M80?) with black wiring, boot release, motion (microwave) sensor, slient arm / disarm feature, built in turbo timer, boot release etc etc and it cost ~$500 fitted

The first week or 2 it drove me crazy...... everytime my work colleagues parked next to me in the basement it 'detected them' and beeped and if they hung around too long it would alarm

Advice - read the manual fully and straight away :shock:

I eventually got around to reading it and discovered by pressing button combinations (button 1 then 2) I could arm but deactivate the microwave sensor - now I have best of both worlds..... keeps people away in public and doesn't offend co-workers!! :D 8) :D
Previous - SP | Previous - 10AE

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

Immob and Alarm

Postby TieNN89 » Thu May 28, 2009 5:22 pm

get the microwave sensor adjusted down

I too have microwave sensor its kind of a fiddle to adjust it correctly but once you got it right it shouldn't go off when people park next to yours

the sensitivity is too high for the internal

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Immob and Alarm

Postby Jeo » Thu May 28, 2009 5:58 pm

Took me the better part of a week to get the adjustment on my microwave sensor set just right. It was originally way to sensitive, where if you walked somewhere vaguely near it, it would set the alarm off. I've now got ti to the stage where walking right up to it wont do anything, but putting your hand in while the roof is down will set it off.

love5
Driver
Posts: 82
Joined: Fri Jun 20, 2008 10:09 am
Vehicle: ND - 2 GT
Location: Gold Coast

Immob and Alarm

Postby love5 » Thu May 28, 2009 6:23 pm

Sorry I forgot to mention I did adjust the sensitivty too and you are right they required a week 'tweaking'

Now if you stand a few inches away it says hello but that's it
Previous - SP | Previous - 10AE

User avatar
TieNN89
Speed Racer
Posts: 2012
Joined: Mon Nov 26, 2007 8:27 pm
Vehicle: NC
Location: Brisbane
Contact:

Immob and Alarm

Postby TieNN89 » Sun May 31, 2009 1:42 am

yeh mine was adjusted just right then a few months later down the track

It picked up every big van or truck that access the driveway infront of where I park her at work


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 128 guests