Does anyone know the part number for the NB 4way fuel pump connector pins?
I’m going to wire in a relay to feed power direct from the battery ala “Trackspeed Fuel Pump re-wire kit” but without the $300 inc shipping price tag
Have a relay, wires and fuse block, just need to get 2 new pins and seals for the power and earth cables.
NB Fuel pump connector pins
Moderators: timk, Stu, zombie, Andrew, -alex, miata
- Roadrunner
- coyotes after you
- Posts: 1111
- Joined: Tue Nov 06, 2012 9:02 pm
- Vehicle: NB SE
- Location: Newcastle
NB Fuel pump connector pins
MeepMeep
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: NB Fuel pump connector pins
2 great sources:
https://www.bmotorsports.com/shop/static.php/post/miata
Google "Connector Witch Hunt" and you'll find MT.net's thread on this.
- simplest to use the first link, Ballenger worked in conjunction with MT.net to produce the page
https://www.bmotorsports.com/shop/static.php/post/miata
Google "Connector Witch Hunt" and you'll find MT.net's thread on this.
- simplest to use the first link, Ballenger worked in conjunction with MT.net to produce the page
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
- Roadrunner
- coyotes after you
- Posts: 1111
- Joined: Tue Nov 06, 2012 9:02 pm
- Vehicle: NB SE
- Location: Newcastle
Re: NB Fuel pump connector pins
Ah sweet!
Any suggestions on where to get Sumitomo pins in Australia? A few places sell them, but not this particular pin.
Bellinger want $60 USD to post 2 terminals
Any suggestions on where to get Sumitomo pins in Australia? A few places sell them, but not this particular pin.
Bellinger want $60 USD to post 2 terminals
MeepMeep
- Lokiel
- Forum legend
- Posts: 4126
- Joined: Thu May 28, 2009 2:39 pm
- Vehicle: NB SE
- Location: Brisbania
Re: NB Fuel pump connector pins
These guys are in Brendale and should be able to help:
https://www.rapidcables.com.au/terminals-contacts/~-410?cn=312&rf=cn
Find the width and length of the Sumitomo pin from this page - it's likely to work.
These guys may be able to help also:
https://www.ozautoelectrics.com/sumitomo-1500-0106-terminal.html
https://www.rapidcables.com.au/terminals-contacts/~-410?cn=312&rf=cn
Find the width and length of the Sumitomo pin from this page - it's likely to work.
These guys may be able to help also:
https://www.ozautoelectrics.com/sumitomo-1500-0106-terminal.html
Don't worry about dying, worry about not living!
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
Garage Thread: http://www.mx5cartalk.com/forum/viewtopic.php?f=57&t=76716
- Roadrunner
- coyotes after you
- Posts: 1111
- Joined: Tue Nov 06, 2012 9:02 pm
- Vehicle: NB SE
- Location: Newcastle
Re: NB Fuel pump connector pins
Ohh I forgot about this thread. So I contacted pretty much every supplier/retailer in Australia who listed Sumitomo terminals and no one had them.
Ended up ordering overseas from Corsa Technic and grabbing heaps of Tefzel cable, seals, heat shrink, connectors and other bits and bobs that are way cheaper over there than in Aus to make the near $60 postage more bearable.
This is the 18cent terminal required: https://www.corsa-technic.com/item.php?item_id=349
I wired up the relay as normal. Feed wired straight from the battery to relay and then to the pump connector, ecu power wire is repurposed as the relay trigger and earths wired appropriately. Engine start had more kick to it straight up and bonus is the relay has been mounted in a hidden position that I can easily reach should I want to remove it for extra theft prevention if parked up somewhere (though there’s probably a higher chance I’d lose the relay and be stuck somewhere than the car being stolen)
WIP
Ended up ordering overseas from Corsa Technic and grabbing heaps of Tefzel cable, seals, heat shrink, connectors and other bits and bobs that are way cheaper over there than in Aus to make the near $60 postage more bearable.
This is the 18cent terminal required: https://www.corsa-technic.com/item.php?item_id=349
I wired up the relay as normal. Feed wired straight from the battery to relay and then to the pump connector, ecu power wire is repurposed as the relay trigger and earths wired appropriately. Engine start had more kick to it straight up and bonus is the relay has been mounted in a hidden position that I can easily reach should I want to remove it for extra theft prevention if parked up somewhere (though there’s probably a higher chance I’d lose the relay and be stuck somewhere than the car being stolen)
WIP
MeepMeep
-
- Speed Racer
- Posts: 3119
- Joined: Tue Mar 11, 2014 8:33 pm
- Vehicle: NA8 - Supercharged
- Location: Brisbane
Re: NB Fuel pump connector pins
Tell me that you put a fuse in it immediately after the battery.
- Roadrunner
- coyotes after you
- Posts: 1111
- Joined: Tue Nov 06, 2012 9:02 pm
- Vehicle: NB SE
- Location: Newcastle
Re: NB Fuel pump connector pins
Red_Bullet wrote:Tell me that you put a fuse in it immediately after the battery.
Absolutely!
MeepMeep
Return to “MX5 Audio, Electronics & Lighting”
Who is online
Users browsing this forum: No registered users and 8 guests