How to tube a VVTUNERBOX

[chrons_rotary]

Hi, i recently went through a similar install, NB8B engine in a NA8.
For the install you will need to do a few wiring changes:
-Run the inlet cam sensor wiring to the VVTuner box
-Run the crank sensor wiring to the VVTuner box
-Run 2 wires to the VVT solenoid
-Run some wiring from the VVTUNER CAM sensor OUTPUT to the ECU CAM sensor INPUT
-Run some wiring from the VVTUNER CRANK sensor OUTPUT to the ECU CRANK sensor INPUT

It is all documented in the instructions, and the base tune is pretty close, but the PID settings might need slight adjusting.
Tuning it for fuel efficiency or power, you will probably need a dyno.

Cheers,
Ken.