Microtech LT10s wiring to CAS???

[whitena6 II]

Hi there

I have installed a Microtech LT10s into my NA6 along with an AVO turbo kit and a bunch of other stuff.

The car is now at the tuners, and they rang me today to tell me the Microtech was not getting a cranking signal from the CAS.

When i wired in the LT10s i had to make an educated guess at how to connect the Microtech CAS harness to the NA6 CAS, because i did not have an MX5 specific wiring diagram for the Microtech.

So the Microtech has 4 wires: white, green, black, red.

The MX5 CAS has 4 wires: yellow/blue, white, black/green, white/red.

If anyone can confirm which wire connects to which, that would be awesome. I have PMed Sean who seems to be a guru with Microtech installs, but he has not yet been able to help.

thanks in advance!
matt

[Russellb]

The MX5 CAS has 4 wires:
yellow/blue
white =
black/green = earth
white/red = 12v

[whitena6 II]

The MX5 CAS has 4 wires:
yellow/blue
white =
black/green = earth
white/red = 12v

Yeah that's what I thought, and the yellow/blue and white are the two signal wires. But which one is which and how do I connect to Microtech?

[whitena6 II]

Never mind. Got it sorted.