Danns Dashboard not working right thread number xxx

Postby **NitroDann** » Mon Oct 31, 2011 4:36 pm

So im testing the guage now. If anyone else wants to get hands on Id appreciate if you would do the follOwing.

Remove the parcel shelf carpet. Remove the metal cover with 6 screws in it. Its shaped like a hatchback sillhouette. (spelling I know).

You will see the top of the fuel tank. The electrical connector has 4 wires on it.

The yellow wire and the black wire below it are for the level sender. The other 2 are the pump.

Could somebody please disconnect it and turn the ignition on. The guage should go to empty. Now bridge those 2 pins with a paperclip and the guage should go to full.

Can somebody please confirm this?

Thanks.
Dann

Postby **NitroDann** » Mon Oct 31, 2011 4:40 pm

Better yet if anyone knows the resistance specs on the sender that would be great. Right now Im banking on empty being 0 ohms and full tank being infinite ohms.

Thanks,
Dann

Muzdaman · Postby **Muzdaman** » Mon Oct 31, 2011 5:33 pm

Dann,

I have a spare 180 km/h cluster you can borrow if that helps.

let me know.

Brian

Postby **NitroDann** » Mon Oct 31, 2011 5:56 pm

Awesome. I jumped it to display full tank, and manually set the needle at full tank. Then when I plugged it back in it displayed about the amount of petrol I think is right.

Ill PM you if it isnt right.

Dann