aust delivered '96-'97 na8 ecu: pic needed of inside

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

aust delivered '96-'97 na8 ecu: pic needed of inside

Postby 93_Clubman » Sat Sep 05, 2009 4:14 pm

Edit: Could someone please post a photo of the inside (component side) of an Australian delivered '96-'97 NA8 ECU with the 'P5' revision number in the VIN. Japan got a new 16 bit ECU in August '95 built cars, so I expect we got it in '96-'97 complianced cars, but would like to confirm to determine if our ECUs can be chipped as has been confirmed for Oct '93 - Dec '95 inclusive complianced cars. See following updated post for further info:
viewtopic.php?f=57&t=37873&start=30
Thanks in advance. End edit.


i'm trying to determine if the australian delivered nb8a (Jan 1998- Sep 2000) ecu used a flash rom like the jdm & us delivered cars, or eprom like the na8 - grateful any assistance.

here's a pic of the eprom (rectangular chip to the left of the square chip near centre) in an na8 ecu:
2mfynhh stock2.jpg


& here's a pic of a 2002 nb8b ecu thought to be a euro delivery:
p2250024_1.jpg
You do not have the required permissions to view the files attached to this post.
Last edited by 93_Clubman on Fri Sep 25, 2009 11:55 am, edited 2 times in total.

User avatar
Matty
Racing Driver
Posts: 1652
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB8A
Location: Melbourne
Contact:

pic needed of inside of aust delivered nb8a ecu

Postby Matty » Thu Sep 10, 2009 2:36 pm

Come round to my place (burwood) and you are welcome to look.

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

pic needed of inside of aust delivered nb8a ecu

Postby 93_Clubman » Thu Sep 10, 2009 3:02 pm

Tks Matty - it's an hour or so drive away, but I'll keep it in mind for next time I'm heading up that way if also convenient with you.

User avatar
Matty
Racing Driver
Posts: 1652
Joined: Wed Apr 23, 2003 11:00 am
Vehicle: NB8A
Location: Melbourne
Contact:

pic needed of inside of aust delivered nb8a ecu

Postby Matty » Sat Sep 12, 2009 6:14 pm

Here you go...
Image

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

pic needed of inside of aust delivered nb8a ecu

Postby 93_Clubman » Sun Sep 13, 2009 1:04 am

Thanks Matty - much appreciated!

I'm no expert but the NB8A ECU certainly has different chips to the NA8 ECU - not a 28 or 32 pin EPROM in sight, which will make at least some of the work done by the folks on Miata.net not transferable to the NB8A. However, still a possibility it could be applicable to late '95, '96 & '97 NA8.

93_Clubman
Speed Racer
Posts: 11854
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

aust delivered '96-'97 na8 ecu: pic needed of inside

Postby 93_Clubman » Fri Sep 25, 2009 11:58 am

Could someone please post a photo of the inside (component side) of an Australian delivered '96-'97 NA8 ECU with the 'P5' revision number in the VIN. Japan got a new 16 bit ECU in August '95 built cars, so I expect we got it in '96-'97 complianced cars, but would like to confirm to determine if our ECUs can be chipped as has been confirmed for Oct '93 - Dec '95 inclusive complianced cars. See following updated post for further info:
viewtopic.php?f=57&t=37873&start=30
Thanks in advance.


Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 129 guests