drivers side door actuator

Audio, Electronics and Lighting questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
silvermiata
Fast Driver
Posts: 202
Joined: Tue Jul 31, 2007 7:59 am
Vehicle: NB8A
Location: Sydney

drivers side door actuator

Postby silvermiata » Mon Jun 02, 2008 10:16 am

i have put an alarm system in my car recently, and i have put a jaycar actuator on the drivers side door, however, because of the extra thickness of the actuator, i can hardly put the door skin back on... and i can hear actuator is rubbing against the door skin...

has anyone experienced this? is there any trick? i am thinking about taking it apart again and shaving the actuator from both side so it would be skinnier?
Top
User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:
Contact Garry

Postby Garry » Mon Jun 02, 2008 10:25 am

You need to relocate the actuator to another spot. The ones I have fitted to NA's didn't rub on anything and the door trim fitted back on with no issues.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
Top
silvermiata
Fast Driver
Posts: 202
Joined: Tue Jul 31, 2007 7:59 am
Vehicle: NB8A
Location: Sydney

Postby silvermiata » Mon Jun 02, 2008 10:29 am

i have seen the inside of the NA door online, it is different to nb's (i have an NBthe way i did is how it shows on miata.net..but maybe their actuator is skinnier.. i will take it apart and have a look, but has anyone experienced this before?
Top
Post Reply

Return to “MX5 Audio, Electronics & Lighting”

Who is online

Users browsing this forum: No registered users and 33 guests