Simon's KF TX3

Any laptimes and Dyno results that you want recorded.
User avatar
Atmo
Learner Driver
Posts: 14
Joined: Thu May 14, 2009 5:11 pm

Simon's KF TX3

Postby Atmo » Fri May 22, 2009 4:15 pm

Hi all,

I know it's not an MX5, but it does have a BP under the bonnet and I thought it might be interesting to compare my little front driver to its RWD cousins.

Mods include:

Engine - genuine 330,000km on the clock, mild grind cams with adjustable pulleys, revised inlet pre-afm with shielded pod filter and CAI (makes 80-85kw atw)
Exhaust - off the shelf extractors, 2 inch high-flow metallic cat, 2 inch press bent exhaust with glass packed resonator and semi straight through glass packed muffler
Gearbox - standard 5 speed, Exedy Sports Tough clutch, no LSD
Suspension - off the shelf King Springs f+r, standard shocks, Whiteline camber bolts front (-1.5 deg camber), standard sway bars f+r
Brakes - standard with Lucas pads
Wheels - 16x7.5 DTM Fins (heavy!)
Tyres - Hankook RS2 Z212 in 205/45-16

Lap Times:

Calder - 1:17.9 (only run there once without revised cams/inlet/extractors/pads)
Sandown - 1:37.8
Winton - 1.49.2
You do not have the required permissions to view the files attached to this post.

User avatar
SuperMazdaKart
Racing Driver
Posts: 1980
Joined: Tue Oct 26, 2004 9:10 pm
Vehicle: ND - 2 GT
Location: Adelaide

Simon's KF TX3

Postby SuperMazdaKart » Fri Jun 19, 2009 10:54 pm

A KF fwd TX3 with no turbo? I thought Ford only did a fwd only non turbo for the B6 KE TX3.
Image

User avatar
hks_kansei
Speed Racer
Posts: 6154
Joined: Tue Feb 03, 2009 10:43 am
Vehicle: NB8A
Location: Victoria

Simon's KF TX3

Postby hks_kansei » Tue Jun 23, 2009 12:56 pm

nope, KF was available in N/A

KF was available with:

1.6 carb (base models)
1.6i (uncertain)
1.8i (Ghia and S)
1.8i DOHC (TX3)
1.8i DOHC Turbo (TX3)
1.8i DOHC Turbo 4WD (TX3)
1999 Mazda MX5 - 1989 Honda CT110 (for sale) - 1994 Mazda 626 wagon (GF's)

User avatar
Atmo
Learner Driver
Posts: 14
Joined: Thu May 14, 2009 5:11 pm

Simon's KF TX3

Postby Atmo » Wed Jun 24, 2009 5:21 pm

Hey guys,

To my knowledge, all non-turbo KF TX3s were front wheel drive, while all turbo KF TX3s were 4WD. There wasn't a turbo front wheel drive version available from the factory, but there are plenty of front wheel drive TX3s now getting around with BPT conversions.

User avatar
bensale
Racing Driver
Posts: 1984
Joined: Tue Sep 11, 2007 7:38 pm
Vehicle: NA6
Location: Melbourne Australia
Contact:

Simon's KF TX3

Postby bensale » Wed Jun 24, 2009 6:01 pm

Nice car, sounds like a great spec. The times are quite impressive too.

I'm a huge fan of these little things, espcially the turbo. The TX3 was a giant killer in its day, it did amazingly at the early bathurst 12 hours, Kent Youlden finishing 2nd once. Also did pretty well at Targa with Dick Johnson before the turbo blew.
www.othersideproductions.com
NA6-Phillip Island 1:57.7, Winton 1:42.9, Winton Short 1:12.4, Sandown 1:35.2, Wakefield 1.15.9, Nurburgring 9:17.0

User avatar
SuperMazdaKart
Racing Driver
Posts: 1980
Joined: Tue Oct 26, 2004 9:10 pm
Vehicle: ND - 2 GT
Location: Adelaide

Simon's KF TX3

Postby SuperMazdaKart » Thu Jun 25, 2009 4:01 am

Surprising the gearbox didn't go out first ey, rumour has it the turbo in Johnson's car was running 20psi.
Image


Return to “Laptimes and Dyno Results”

Who is online

Users browsing this forum: No registered users and 6 guests