mx5cartalk.com

Can anyone confirm if these are the correct part numbers for NA8 brakes? Want to do a freshen up at the same time I do the pads, rotors and lines including painting the bracket and caliper. Don't think I'll do the 25kw red option, just black or silver. Might only be good for an extra 5kw I guess.

Front: NAY53326Z

Rear: NAY12646ZA is listed as discontinued by Amayama, is NAY12646ZB the new version (also listed as seal and gasket kit)?

That's the genuine Mazda parts. There's also listings for Pitwork aftermarket option. Anyone used these? Almost half the price of the Mazda items.

Finally does a kit do a single caliper or the pair?

Thanks.

According to the Mazda EPC they are the part numbers:
http://mazdaepc.com/parts/MX-5/AENA04/W1/3310/
http://mazdaepc.com/parts/MX-5/AENA04/W1/2610/
& if you click on 2646Z in the second link it includes NAY12646ZB under specification as opposed to part#. Following thread also talked about part #s & links to a few other threads about caliper seal kits: viewtopic.php?f=30&t=74942

Thanks. Yeah I'd seen that other thread but it was more about NB and I recall some (all?) NB had different brakes, or was it just different rotors and brackets? I've forgotten a lot of stuff that I used to know about these.

ADM NA8 & ADM NB8A front & rear brakes were the same. ADM NB8B had the USDM NB8B Sports Brakes, as opposed to the USDM NB8B standard brakes which were carried over from the NB8A.

mx5parts.co.uk have both front and rear repair kits. I've used them and they do appear to be good quality. Not cheap though.

Thanks but I've order genuine from Amayama. I was ordering some other parts from them anyway.