mx5cartalk.com

Hopefully i find someone, want to know what it takes to fit

Thanks
This was my 15x8 et0 with no arch work just too big




Sent from my iPhone using Tapatalk

Surely someone?


Sent from my iPhone using Tapatalk

Here you go champ.
Plenty more here as well
viewforum.php?f=30

What arch work did you have to do?


Sent from my iPhone using Tapatalk

Guard rolling front for sure and maybe rear as well depending on how low you want to go. That extra inch makes all the difference
http://sydneyguardrolling.com.au/
Nelson is a expert and I highly recommend.

I've answered your question last time in one of your threads:

http://mx5cartalk.com/forum/viewtopic.php?f=30&t=71501

15x8, +20 with 205/50/R15 with need a slight roll of the fender lip if you are moderately low. 16s in the same size with CORRECT sized tyres (read 205/45) with fit the same.

DSC_0111 by An Phan, on Flickr

Did you have any camber? People talk about natural camber gain..
My wheels are straight as in zero camber and on shocks and springs, so I can't go lower. I want the look you have, just scared of being outside my front fender yet again and being defect noticed..again

The look you have is perfect though.. Spot on

Sorry for the repeat question


Sent from my iPhone using Tapatalk

You will gain negative camber as you lower the car naturally. It normally has a positive effect on the handling characteristics of the car. That is as long as everything is dialled in accordingly as well.

To be honest I really don't know what the alignment specs are at the moment. I haven't had it aligned for a while, but there is a little bit of neg camber on the wheels.

cherrymx5 wrote:Did you have any camber? People talk about natural camber gain..
My wheels are straight as in zero camber and on shocks and springs, so I can't go lower. I want the look you have, just scared of being outside my front fender yet again and being defect noticed..again

The look you have is perfect though.. Spot on

Sorry for the repeat question


Sent from my iPhone using Tapatalk

That's 16x8.25 +15 so it's 8mm wider than what your talking about. I have - 3 camber on the front and rear

16x8 +15 on 205/45

mx5002 wrote:

That's 16x8.25 +15 so it's 8mm wider than what your talking about. I have - 3 camber on the front and rear

Are these a staggered fitment?


Sent from my iPhone using Tapatalk

No same specs all round.

If you have a look in garage chat. Corey's Nb journal. I think his first set of wheels were the same specs that your asking about too

my old NB with MS03s 16x8 +32 with 20mm spacers. So +12 offset in the pic

All sorted 16x8+20 cheers for the info and pics


Sent from my iPhone using Tapatalk

Looks great. About as far as I'd go without it being obvious cop bait.

Sent from my LG-H815 using Tapatalk