Monopan
Posted: Sun Feb 21, 2016 7:05 pm
A few people have asked recently about using Monopan http://www.lavender-ce.com/advanced-composite-materials/sandwich-panel-monopan/.
To demonstrate what sort of damage this stuff can take have a look at this video
The pipe made a rather large noise, however the damage was suprising...
The force bent the aluminium front edge up, it just needs to be tapped out straight with a large hammer
DSCN2954 by Eipeip, on Flickr
The damage, you can see the scrape mark. The 2 holes at the top are where one of the mount points are
IMG_1282[1] by Eipeip, on Flickr
Close up of the damage, very suprising how little there actually was
IMG_1284[1] by Eipeip, on Flickr
Close up of the front edge
IMG_1283[1] by Eipeip, on Flickr
To demonstrate what sort of damage this stuff can take have a look at this video
The pipe made a rather large noise, however the damage was suprising...
The force bent the aluminium front edge up, it just needs to be tapped out straight with a large hammer

The damage, you can see the scrape mark. The 2 holes at the top are where one of the mount points are

Close up of the damage, very suprising how little there actually was

Close up of the front edge
