King Spring NA Low - Free Lengths

Drek · Postby **Drek** » Mon Feb 25, 2013 8:25 pm

I used the search engine last week to find these lengths and they didn't show, so here they are..

KING SPRING FREE LENGTHS - LOW NA

KMFL - 52 .. 245mm

KMRL - 53 .. 275mm

and this application chart specifies Koni bumpstop rumbers # 7134420000 on the front -

http://www.georgestock.co.nz/trade/securedata/kings.pdf

:beer:

KevGoat · Postby **KevGoat** » Tue Feb 26, 2013 9:49 pm

I'd still go FCM bumpstops .... :wink:

Drek · Postby **Drek** » Sat Mar 02, 2013 11:09 pm

Cheers KevGoat - so what size stops do you recommend - the 36mm or 46mm comfort or the Dual Purpose combo? And for yellow Konis I also need 4 x 9mm spacers and dustboots ? The dustboots seem cheap at $20 for 4?

http://fatcatmotorsports.com/FCM_Koni_p ... A.htm#bump

I see they have 54mm on the graph but not in their price list?

http://fatcatmotorsports.com/igallery/g ... m_NA_1.JPG

is there anything else I should get ?

Thanks for your help maaaate... :beer:

Derek

KevGoat · Postby **KevGoat** » Sun Mar 03, 2013 10:55 am

Best way is to email or even phone Shaik at Fatcat (just remember to allow for the time differences lol)

He's a great guy. While I was going through the torment of my suspension, he answered every question I threw at him and had so much patience and interest in what I was doing. Most of our correspondence ended up just "conversation", nothing to do with my suspension

He's a genuine enthusiast.

He's a very busy person, but answered most of my emails pretty quickly.

So yeah, chuck him an email with all the details of your set up, what you use the car for, your aims for the suspension and he'll give you the proper advice on what to use.