NC Wheel Alignment Vic.
Posted: Tue Apr 12, 2011 7:17 pm
I am looking for someone with direct experience of having their NC set up by a Melb based alignment shop.
My car has Bilsteins/Eibachs , whiteline front and rear sways and is running 225/45 x17's on RPFs 17x8 (soon to be 215/45's).All this was done by the previous owner.
It tramlines a bit, requires constant correction on the highway and feels dead at straight ahead.It turns in well and has good corner grip.Is dríven reasonably hard but not tracked.
I would normally take it to Centreline or TruTrak but would be intersted to hear if anyone here has used them for their NC or have had a good experience with another shop.Only interested in NC experiences.
Thanks,
Peter.
My car has Bilsteins/Eibachs , whiteline front and rear sways and is running 225/45 x17's on RPFs 17x8 (soon to be 215/45's).All this was done by the previous owner.
It tramlines a bit, requires constant correction on the highway and feels dead at straight ahead.It turns in well and has good corner grip.Is dríven reasonably hard but not tracked.
I would normally take it to Centreline or TruTrak but would be intersted to hear if anyone here has used them for their NC or have had a good experience with another shop.Only interested in NC experiences.
Thanks,
Peter.