SE Sway Bars on an NB8A..
Posted: Wed Dec 23, 2009 9:26 am
The (red coloured) SE anti-sway bars (that I bought from Davex3) are now fitted to my 10AE. The changeover, tho' straightforward for a capable mechanic, took an hour to complete, as the front mounting points are difficult to access.
For the record there is a 2mm difference in thickness between the SE bars (Front: 23mm. Rear:14mm.) and the 10AE (NB8A) bars. (Front:21mm. Rear:12mm).
The Endlinks appear to be identical.
This was a very worthwile 'swap-over' as the car, even at low speed but running on 14" tyres, now feels noticeably more secure.
Thank you 93 C'man for suggesting this improvement to me!
For the record there is a 2mm difference in thickness between the SE bars (Front: 23mm. Rear:14mm.) and the 10AE (NB8A) bars. (Front:21mm. Rear:12mm).
The Endlinks appear to be identical.
This was a very worthwile 'swap-over' as the car, even at low speed but running on 14" tyres, now feels noticeably more secure.
Thank you 93 C'man for suggesting this improvement to me!