Page 1 of 1
15x7 with offset -12
Posted: Fri Nov 06, 2009 11:47 am
by cosmo
Would these fit an NA...? (tires 205/50/15)
15x7 with offset -12
Posted: Fri Nov 06, 2009 11:50 am
by RG.net
Not with those Tyres.
Even with stretched tyres you would have too much poke and need to be slammed for the wheels to look any good on the car.
15x7 with offset -12
Posted: Fri Nov 06, 2009 11:54 am
by broady
You'd probably want flares.
15x7 with offset -12
Posted: Fri Nov 06, 2009 11:59 am
by cosmo
ok... the add says they fit RX2, RX3 & RX7 (thought the MX5 would be close...
15x7 with offset -12
Posted: Fri Nov 06, 2009 12:14 pm
by Jeo
RX2 and 3 aren't 4x100 either
15x7 with offset -12
Posted: Fri Nov 06, 2009 1:04 pm
by green_comet
That size wheel would sit the same as 15x8 0et wheel. You can pull it off but you need to roll/pull guards, slam your car, and run a fair amount of camber. Those tyres would have to go for some 195/50's or thinner.
15x7 with offset -12
Posted: Fri Nov 06, 2009 1:32 pm
by hks_kansei
cosmo wrote:ok... the add says they fit RX2, RX3 & RX7 (thought the MX5 would be close...
RX2/3 PCD = 4X110
RX7 Series 1 PCD = 4x110 (possibly series 2 as well)
NA/NB MX5 PCD = 4x100
15x7 with offset -12
Posted: Fri Nov 06, 2009 1:46 pm
by cosmo
Thanks guys.....didn't want to slam car in any way, so might pass on them...
15x7 with offset -12
Posted: Fri Nov 06, 2009 3:15 pm
by hks_kansei
cosmo wrote:Thanks guys.....didn't want to slam car in any way, so might pass on them...
wont fit anyway, the wheel studs on the early RX series (RX2/3) are 10mm further apart than on an MX5.