Page 1 of 1
Will these fit?
Posted: Mon Aug 04, 2008 12:22 pm
by PASHN8
Ok chaps,
I've come across a set of wheels that I like, simple 5-spoke design.
My question to you, what is the standard offset on an NB8C SE Racing Hart?
These new rims are 18" x 8" with an 8P offset (I have no idea what 8P means, as i've only ever heard of +20/+40 etc) and yes they are 4 x 100 PCD.
Any ideas?
Dino!
Will these fit?
Posted: Mon Aug 04, 2008 2:31 pm
by blackster
PASHN8 wrote:Ok chaps,
My question to you, what is the standard offset on an NB8C SE Racing Hart?
04 Racing heart has a 40mm offset.
These new rims are 18" x 8" with an 8P offset (I have no idea what 8P means, as i've only ever heard of +20/+40 etc)
Any ideas?
Offsets are sometimes referred to as being ~p or ~m (i.e. an "8p" offset or a "5m" offset, etc.) which again indicates roughly how far plus or minus the offset is.
I believe audi's use ~p, try the eurocca forum for more info.
Will these fit?
Posted: Mon Aug 04, 2008 3:02 pm
by sliq
are these the modenas? they're pretty delish with dish
Will these fit?
Posted: Mon Aug 04, 2008 5:48 pm
by meanmx
Are you trying to give Wun a heart attack??? Love the rims by the way, I think they would look great on your car. From what I can gather 8p is a type of Audi ie Audi A3 8p. Sure there is no ther info regards offset?
Ben
Will these fit?
Posted: Mon Aug 04, 2008 6:25 pm
by Adam_NAclubman
8P is +8
P = Positive
They'd fit an NA, dunno about a NB
Will these fit?
Posted: Mon Aug 04, 2008 7:08 pm
by PUR157
meanmx wrote:Are you trying to give Wun a heart attack???
Don't worry there's so many screws around the hub... he can just leave every 3rd one in or something... she'll hold...
Will these fit?
Posted: Mon Aug 04, 2008 11:03 pm
by TieNN89
Will these fit?
Posted: Tue Aug 05, 2008 12:57 am
by meanmx
PUR157 wrote:meanmx wrote:Are you trying to give Wun a heart attack???
Don't worry there's so many screws around the hub... he can just leave every 3rd one in or something... she'll hold...
lol classic, but you know he would try for every forth as every third is still too heavy
Ben
Will these fit?
Posted: Tue Aug 05, 2008 11:52 am
by bruce
May not be a genuine 2 or 3 piece wheel, so you could take all the screws out anyway !
Will these fit?
Posted: Tue Aug 05, 2008 12:07 pm
by wun911
Well where you put the air in is already missing one bolt, so could probably get away with every third bolt, at least give it a try.
Ehhh they are fake two piece wheels? So some dude jb welded the two pieces together so you can get rid of all the screws? Man thats a cool weight saving idea.
That and make the P8 offset to like + 40 with an angle grinder.
Still my 16" OEM will be lighter
Will just need to lose about 100 kg and can beat his SE....
Will these fit?
Posted: Tue Aug 05, 2008 6:35 pm
by meanmx
wun911 wrote:Well where you put the air in is already missing one bolt, so could probably get away with every third bolt, at least give it a try.
Ehhh they are fake two piece wheels? So some dude jb welded the two pieces together so you can get rid of all the screws? Man thats a cool weight saving idea.
That and make the P8 offset to like + 40 with an angle grinder.
Still my 16" OEM will be lighter
Will just need to lose about 100 kg and can beat his SE....
Fake 2 piece. From what I have read they are very expensive genuine 2 piece wheels. Wun you love that angle grinder wayyyyyy too much and going from the list of bits he just bought I would say you would need to lose more than 100kg's
Ben
Will these fit?
Posted: Tue Aug 05, 2008 10:54 pm
by Alf
How do they look in the 4 stud pattern, looks speccy in 5, but can't imagine 4 working at all.
Cheers,
Alf
