Page 1 of 1

rear chassis brace install

Posted: Thu Nov 30, 2006 12:24 am
by micksta
hi all
just bought rear brace from mania
i know it bolts somewhere on the rear alignment bolts but not sure.

if anyone has a pic of one on their car it will be a great help

do you unscrew the bolt right off ?
if so which one ?



all confused

micksta

Posted: Thu Nov 30, 2006 12:49 am
by StanTheMan
It should bolt on from the rear of the rear subframe.

make sure you mark where the adjustment washers are. at the front & rear of the rear subframe.

try to get someone to help you unbolt the bolts to make sure nothing gets unajusted. Get one person to hold the bolt towards the front to stay steady as you loosen the rear one.

I placed the brace between the bolt & that adjustment washer. & tighten again.

I' did get another wheel allingment done just after installation.


It only fits one way to clear the exshaust
I also had to dremel out one of the bolt holes slightly to make it fit.
hold it up against it & see if you need to modify it before you go unbolting.


hope thats the correct procedure & hope it helps.

pics....to lazy for that right this minute. :roll:

Posted: Thu Nov 30, 2006 1:06 am
by StanTheMan
mmmm...ok then.....there you go

ImageImage

Posted: Thu Nov 30, 2006 9:15 pm
by micksta
stan the man

thank you
thank you

once again

thank you


micksta

Posted: Thu Nov 30, 2006 9:19 pm
by StanTheMan
no probs micksta


glad to be of help :mrgreen: