mx5cartalk.com

okaaaay - all I need is a pic of the inside of the hub area and one of the outside area - preferably a hi res pic, nothing special.

If anyone has a set of these things on their car and is willing to take the thing off long enough to take a snap or two and email em to me I would be eternally grateful!

there is a genuine reason for this request

pm for email addy please, or velvet_rain |+at|+ iinet dots net dot hey you!

Here you go. Sorry but it was dark by the time I got to take the photos and I didn't really know what you were looking for so I took heaps.

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280001.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280002.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280003.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280004.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280005.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280006.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280007.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280008.JPG

http://www.hotkey.net.au/~gmarsh/my_mx5/wheels/PA280009.JPG

They are full size and not scaled, so you can download them and do with them what you need to... Hope that helps!

Boags

hey thankyou verry much for that - i wanted to have some pix of the inner hub so that i can take it to an engineering place, see if they can mod them...

muchly appreciated!

No worries, have you got what you need?

sure do, the pix are great - although it does look like there is no room on the hub for another set of holes

I will take the pix to dragway on tuesday and ask them what they think.

at least this way i dont hafta buy another set of rims only to find out that i cant get more holes put in them...

These wheels are imported by Tempe Tyres in Sydney.
If you need a set with different holes, ask them, and they might be able to help you as I know they have a few different fitments available for them, and perhaps, you can even get a set without holes.
I also know, they can drill holes in the wheels for you for those rare fitments.

Benny wrote:These wheels are imported by Tempe Tyres in Sydney.
If you need a set with different holes, ask them, and they might be able to help you as I know they have a few different fitments available for them, and perhaps, you can even get a set without holes.
I also know, they can drill holes in the wheels for you for those rare fitments.

thanks for that Benny - I did ring them and spoke to some bloke that sounded likes if it washnt a wrx on 24" rimsh mate he didnt wannaknowaboutit

he didnt really know if they came in any hole pattern other than 4x100, and didnt really wanna look. Perhaps he was stonewalling to cover his lack of literacy?