Your damper setting?

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

the_darkside
Fast Driver
Posts: 283
Joined: Sat Apr 03, 2010 9:44 am
Location: Gold Coast, QLD

Your damper setting?

Postby the_darkside » Sun Nov 13, 2011 8:21 am

Just wanted to know what people set theirs at.

A) What suspension do you have?
B) What is your damper setting at, out of?
C) Do you change it depending on what you're doing?
D) What else do you have that would play a part on why you set yours where you do?

I know this is very general but i'm just curious.

A) BC BR coilovers.
B) Front: 18 from hard, out of 30.
Rear: 24 from hard, out of 30.
C) Not really, its my daily, I would if i didn't have to always take out the spare.
D) The roll bar made a massive difference, aswell as being quite low so when I have it too hard the smallest bump caused the back end to jump up and slide out if I was taking the corner hard.
I like my girls how I like my cars, topless.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Your damper setting?

Postby NitroDann » Sun Nov 13, 2011 8:26 am

the_darkside wrote:Just wanted to know what people set theirs at.

A) What suspension do you have?

HKS Hippermax 3 Circuits
B) What is your damper setting at, out of? Right now, 6 from hardest front, 8 frpm hardest rear, 32 settings.
C) Do you change it depending on what you're doing? Absolutely.
D) What else do you have that would play a part on why you set yours where you do?
Well under 900kg, adjustable whiteline swaybars, 90 duro rating race bushes etc
I know this is very general but i'm just curious.

A) BC BR coilovers.
B) Front: 18 from hard, out of 30. These settings are not even close to transferable.
Rear: 24 from hard, out of 30.
C) Not really, its my daily, I would if i didn't have to always take out the spare.
D) The roll bar made a massive difference, aswell as being quite low so when I have it too hard the smallest bump caused the back end to jump up and slide out if I was taking the corner hard. This is because you are on the bumpstops.
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

the_darkside
Fast Driver
Posts: 283
Joined: Sat Apr 03, 2010 9:44 am
Location: Gold Coast, QLD

Re: Your damper setting?

Postby the_darkside » Sun Nov 13, 2011 10:11 am

Thanks for the advice, but I wasn't on the bump stops, my wheel scrapes the guard first, which is why I had it set where it was, and I'm mainly asking out of curiosity, so thanks for you're reply :)
I like my girls how I like my cars, topless.

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: Your damper setting?

Postby Charlie Brown » Sun Nov 13, 2011 8:48 pm

the_darkside wrote:
I know this is very general but i'm just curious.


Very general because of all the different shocks out there and the multitude of settings depending on spring rates and pre load but here goes:

An NC with Tein Flex 5kg front, 4kg rear.
15mm preload front and 10mm rear.
FatCat bumpstops.
16 position settings. Front 5 from full soft, rear 3 from full soft on the road. Just enough to control bounce. Track setting are a secret but hard, depending on track, tyre pressure, temperature and my driving on the day.

Biggest mistake I made: Not putting enough preload in originally and riding on the bumpstops (original Tein's) too much. In other words, too much droop.
Biggest improvement: preload and FatCat's.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Your damper setting?

Postby NitroDann » Sun Nov 13, 2011 9:03 pm

Lol 16 damper settings bit they are secret still, 1 in 16 chance of just guessing it:P

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

User avatar
Tedsmx5
Fast Driver
Posts: 164
Joined: Mon Jul 14, 2008 10:35 pm
Vehicle: NA8 - Supercharged
Location: Newcastle.

Re: Your damper setting?

Postby Tedsmx5 » Sun Nov 13, 2011 10:43 pm

NitroDann wrote:Lol 16 damper settings bit they are secret still, 1 in 16 chance of just guessing it:P

Dann

Dann's not sure himself as he can only count up to 6 :lol: if he knew he would have to kill himself anyway, you left yourself open to that one mate .
My AGX KYB are set to 4 they adjust from 1 to 8.
Ted
Why didn't I buy one years ago?
NA8 Ceramic coated headers, Hi flow cat, 2.5”system, M45 SC 150/62.5 8psi, Dual TB, IC & Adaptronic ECU.

User avatar
NitroDann
Forum sponsor
Posts: 10280
Joined: Thu Nov 05, 2009 12:10 pm
Vehicle: NA6
Location: Newcastle NSW
Contact:

Re: Your damper setting?

Postby NitroDann » Sun Nov 13, 2011 10:50 pm

I dont get it...

Dann
http://www.NitroDann.com

speed wrote:If I was to do it again, I wouldn't even consider the supercharger.

User avatar
Okibi
Speed Racer
Posts: 10901
Joined: Thu Aug 21, 2003 11:00 am
Vehicle: NB SE
Location: Perth, Western Australia
Contact:

Re: Your damper setting?

Postby Okibi » Mon Nov 14, 2011 12:41 am

My NB has tien flex 7kg front 6 rear set to teins recommended setting, racing beat tubular front and solid rear, torsen II, because a stiffer rear sway makes the NB pretty taily I tend to have the rear set pretty soft compared to the front
If you had access to a car like this, would you take it back right away? Neither would I.

the_darkside
Fast Driver
Posts: 283
Joined: Sat Apr 03, 2010 9:44 am
Location: Gold Coast, QLD

Re: Your damper setting?

Postby the_darkside » Mon Nov 14, 2011 8:42 am

Oh, i'm in an NA and its 6kg rear, 8kg front.
I like my girls how I like my cars, topless.

User avatar
MINX
Racing Driver
Posts: 1658
Joined: Mon Apr 07, 2008 7:51 pm
Vehicle: NB SE
Location: Brisbane

Re: Your damper setting?

Postby MINX » Mon Nov 14, 2011 9:37 am

Many variables in this, but I will put my 2c in for the record.

SE with few stiffening mods, MX5 + Bar etc.
Racing Beat 1.125 Front bar, std SE rear bar.
BC Racing Coilovers 8/6kg

DD duties, and if I pass it to Lisa to drive, 15/15 (from 30)
My DD and round town duties, and evn club twisty mountain runs 12/12(from 30)

Swap on the Hankook RS-3s and off to Lakeside
Full Hard/Full Hard

Qld Raceway, maybe 6/6 from hard.
Lakeside 1:02.94 Clubman 1:04.61 Sprint 1:00.81 Sportsman 1:04.27 National 1:28.36 WP 1:15.45 MtCotton 0:51.13 Symmons 1:12.2 Baskerville 1:08


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: Google [Bot] and 156 guests