Hi,
My NC has a bit of unstable steering and I was recommended to check the wheel alignment.
Could anyone suggest a good place in Brisbane to do the alignment for MX5?
What should be the toe-in and/or castor suggested for normal driving?
Thanks
Suggested Place for Wheel Alignment - NC MY06
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
ddent
- Learner Driver
- Posts: 22
- Joined: Sun Jun 29, 2008 11:29 am
-
Charlie Brown
- Speed Racer
- Posts: 2623
- Joined: Mon Apr 28, 2003 11:00 am
- Vehicle: NC
- Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
- Contact:
Re: Suggested Place for Wheel Alignment - NC MY06
Stock NC Suspension use these figures:
Front
1 degree negative camber
6.5 degrees castor
2mm total toe in
Rear
1.5 degrees negative camber
3.0mm total toe in
Front
1 degree negative camber
6.5 degrees castor
2mm total toe in
Rear
1.5 degrees negative camber
3.0mm total toe in
Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20
-
JBT
- Speed Racer
- Posts: 7946
- Joined: Tue Jun 03, 2003 11:00 am
- Vehicle: NC
- Location: Brisbane
Re: Suggested Place for Wheel Alignment - NC MY06
Jeff Graham at Accurate Suspension Services http://accuratesuspension.com.au/. He has done several MX-5s, sets up race cars and races cars.
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 264 guests
