NSW - new suspension modification standards

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

rjastra2
Racing Driver
Posts: 1435
Joined: Thu Sep 25, 2003 10:15 pm

NSW - new suspension modification standards

Postby rjastra2 » Thu Sep 23, 2010 12:26 pm


User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Re: NSW - new suspension modification standards

Postby sliq » Thu Sep 23, 2010 4:57 pm

so we've got to advise the RTA?

seriously. those guys running the show are buffoons.
i can't brain today.. i have the dumb..

BadBong
Racing Driver
Posts: 1364
Joined: Fri Jun 12, 2009 12:10 pm
Vehicle: NB SP
Location: Sydney

Re: NSW - new suspension modification standards

Postby BadBong » Thu Sep 23, 2010 5:47 pm

"You must lower the height for both your front and rear suspension by the same amount...

Well, I've been meaning to ask.

How would the handling be affected if you lower the rear more than the front?"(or vice versa).

Given how low our rides already are on stock, anyone who wants to lower it even more would have trouble scrapping the bottom of the front bumper whenever they navigate over humps and bumps. But maybe if you lower the rear more than the front then it'll make it more 'livable'?

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: NSW - new suspension modification standards

Postby Charlie Brown » Fri Sep 24, 2010 9:13 am

This was canned ages ago. :roll:
Old news. Look at the date - 2009.
There's a thread on it somewhere if you do a search.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

User avatar
philz
Wheel guru
Posts: 1297
Joined: Wed Jun 04, 2008 4:32 pm
Vehicle: ND - 2 GT
Location: Sydney

Re: NSW - new suspension modification standards

Postby philz » Fri Sep 24, 2010 10:31 am

Please re-read the pdf... this is the latest draft :roll:

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: NSW - new suspension modification standards

Postby Charlie Brown » Fri Sep 24, 2010 12:42 pm

philz wrote:Please re-read the pdf... this is the latest draft :roll:


Yes missed that one. :oops: Spotted the 2009 date and blind spotted (because my car was too low) the 2010 date.

Seriously though this draft is slightly better than the last one but still not great for us MX-5 owners. It is still mainly aimed at jacked up 4WDs.

The Pros:
Previously you couldn't fit coilovers or anything other than OEM release equipment. Now you can as long as you comply with the height restrictions, which for MX-5s will be the 100mm clearance. This means we will fall into the under 50mm lower category and be self certified.

The Cons:
Spring manufacturers will need to adjust the length of their springs to suit “trim” and ground clearance rather than a specific drop.

In other words King Springs will need to change the NC drop from 35/30 to 19/19, to maintain “trim” height and 100mm clearance. Other springs such as Mazdaspeed and Eibach can’t be used as they create an uneven “trim” height and give the NC a 90mm ground clearance.

Now to await the Final issue of these reg’s. :roll:


PS Love the reason that lowering the car effects your line of sight. :roll:
I'm over 6' but if you're too short the next thing they will do is ban you from driving because your line of sight is reduced.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20

GP
Racing Driver
Posts: 1025
Joined: Tue Nov 21, 2006 10:42 am
Vehicle: ND - 2 GT
Location: Brisbane

Re: NSW - new suspension modification standards

Postby GP » Fri Sep 24, 2010 1:04 pm

Lower an MX5 :shock: You would have to be mad :)
Graham

User avatar
Jeo
Speed Racer
Posts: 3648
Joined: Thu Jun 26, 2008 9:33 am
Vehicle: NB8B
Location: Canberra

Re: NSW - new suspension modification standards

Postby Jeo » Fri Sep 24, 2010 3:30 pm

You's trollin GP

Overall, I'd say the pro's out weigh the cons for us.

User avatar
sliq
Speed Racer
Posts: 3414
Joined: Sat Jan 13, 2007 12:33 am
Vehicle: ND - 2 GT
Location: Sydney
Contact:

Re: NSW - new suspension modification standards

Postby sliq » Fri Sep 24, 2010 5:07 pm

i think we're in a nanny state.
i can't brain today.. i have the dumb..

User avatar
Charlie Brown
Speed Racer
Posts: 2623
Joined: Mon Apr 28, 2003 11:00 am
Vehicle: NC
Location: Sydney, Just out of Dragon Territory over the bridge in the "Shire"
Contact:

Re: NSW - new suspension modification standards

Postby Charlie Brown » Fri Sep 24, 2010 5:10 pm

sliq wrote:i think we're in a nanny state.


Make more rules. Saves fixing the roads.....and electricity.....and water........and taxes..............and........ sh*t it never ends with this lot does it?

6 months to go then years to fix it.
Image

Wakefield 1:09.13 Eastern Creek GP 1:50.198 Ext 2:17.538 Sth 1:02.9003
Phillip Is 1:58.50 Winton Short 1:10.7 Lakeside 1:05.7711 MDTC 45.20


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 321 guests