Top FR Suspension Arm

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Post Reply
tasroadster
Driver
Posts: 89
Joined: Thu Jun 09, 2005 10:53 pm
Vehicle: ND - 2 GT
Location: Tasmania

Top FR Suspension Arm

Postby tasroadster » Tue May 23, 2006 8:12 am

I am thinking that this arm has seized in my NA6 on both sides

Is it supposed to move freely?
As at present both sides almost add to the spring rate.......
They move with resistance and then spring back into a set position.
Maybe it's just to rubber bushes moving?

It is near impossible to undo the Arms pivot bolt/rod/nut.

Any advice would be greatlt appreciated.

Thanks
Top
User avatar
Russellb
RIP Nov 2014
Posts: 692
Joined: Sat Aug 13, 2005 9:22 pm
Vehicle: Clubman
Location: Harden NSW
Contact:
Contact Russellb

Postby Russellb » Tue May 23, 2006 8:35 am

Normal for rubber bushes to do that
To undo you will need a big breaker bar ( or a rattle gun )
spray plenty on WD40
My ClubmanRebuild
MX5 Solution Canberra ( aka carco )http://www.carco.com.au
Russell's Race and Rally Service
MX5 SE Rally car is HERE :)
Top
User avatar
Garry
Speed Racer
Posts: 3481
Joined: Sun Apr 27, 2003 11:00 am
Vehicle: NB SP
Location: God's Country
Contact:
Contact Garry

Postby Garry » Tue May 23, 2006 9:38 am

What Russell said. Perfectly normal and why you should tighten up all your suspension bolts with the suspension at normal ride height. Ideally you dont want any stress on the rubber bushes when the car is at rest.
Shiney black one with added red bits. Member of the fart club. Now with extra doof and Sunlong. - deceased and gone to heaven
Top
Post Reply

Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 158 guests