Shocks and springs.....

Roodosutaa · Postby **Roodosutaa** » Fri Apr 21, 2006 4:59 pm

adamjp wrote:Since you are in Sydney why not go to KMAC at Taren Point?

Get them to make the springs to your spec and have them fitted.

They can custom build to your ride height and spring rate.

mmm.... K-MAC = $?

anyways, took the plunge and ordered the KYBs from the States, fingers crossed. Good thing the aussie dollar's gone back up a bit, should have them landed for A$490

adamjp · Postby **adamjp** » Fri Apr 21, 2006 6:06 pm

I got a quote from KMAC a couple of months ago and it was very competitive with the price of kings, etc. KMAC also asserts that their springs will not sag like some others, they have a special furnace that makes for better spring steel.

Can't remember what the price was as I am not at home right now and don't have the emails from them.

I do remember that custom, fully adjustable sway bars were $325 each.

adamjp · Postby **adamjp** » Sat Apr 22, 2006 10:13 pm

Correcting my last with a cutting from the KMAC email.

We use the very highest chromium grade spring steel.

K-Mac is also the only Australian manufacturer to use
\"State of the Art\" electric resistance heating for
maximum torsional effectiveness and prolonged life.

Springs (any height required) are $330 set 4 incl GST

Front Anti Sway Bar (24mm) is $180.
Rear (14mm or 16mm ) is $165.

$330 for all 4 springs is very good. A set of Eibachs are on special at a known supplier for just under $400, and that is also a good price.