Page 1 of 1

Exhaust hanger cheat

Posted: Sat Aug 03, 2019 7:18 pm
by Red_Bullet
I just did this, exhaust mount is far more solid. https://motoiq.com/wrench-tip-save-your-exhaust-hangers/

Re: Exhaust hanger cheat

Posted: Sat Aug 03, 2019 8:03 pm
by plohl
10mm wide cable ties also work

Re: Exhaust hanger cheat

Posted: Sun Aug 04, 2019 11:58 am
by hks_kansei
I've never had an issue with them, on any car.

and that includes the MX5 where they've been bent, pried, stretched etc many times when the exhaust has been on and off the car.

Re: Exhaust hanger cheat

Posted: Sun Aug 04, 2019 6:16 pm
by Red_Bullet
Mine allowed too much sideways flex, 2.5 inch exhaust would bump into stuff under cornering forces. Nice to stop the clunking.

Re: Exhaust hanger cheat

Posted: Mon Aug 05, 2019 12:01 am
by Red_Bullet
plohl wrote:10mm wide cable ties also work


Yeah tried cable ties but not 10mm, i have a heavy muffler stuck up the back off the car. It tends o sway about. I did stick 6mm cable ties all over it but they fell off. Hence I'm going for hose clamps to crush them up a bit.