mx5cartalk.com

Mazda quoted $350.00 for a new COP so I decided to upgrade the whole ignition and go to the LS2 style coil. I bought a set of LS7 coils with connectors and pins from Goleby Parts from Toowoomba for $200 delivered. Check out their web site. The order was placed mid morning and turned up the following day (Brisbane). With the dollar down I was not so pleased to not have to go to the US to shop.
Looks like I will have to get the ignition leads custom made. Have any forum members had leads made recently? Any recomendations?

timk would be the best person to ask, but search his forum posts im sure there's plenty of info.

Some here:
http://mx5cartalk.com/forum/viewtopic.php?f=55&t=68000

and here:
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=51007&start=165

Looks like I will have to get the ignition leads custom made. Have any forum members had leads made recently? Any recomendations?

there is a mob at Toowong, use to be at Kallanger that do leads, heaps of the older members, boags and UA had leads made there, but stuffed
if I can remember their name, Calling 1red5/steampunk.

Found it, Qld ignition Leads
0416 366 486

tbro wrote:Calling 1red5/steampunk.

Found it, Qld ignition Leads
0416 366 486

Queensland Ignition Leads.... oh you found it

Toowong, then Kallangur?!?!?
Geez these guys move around as I'm certain when I went there around 2008 they were somewhere around Northgate.
There's only 2 of them and no big/heavy equipment so I guess they just hop around different locations for sh#ts and giggles...?