IGNITION upgrade turboed NB8B

C-Gazer · Postby **C-Gazer** » Wed Sep 16, 2015 11:02 pm

Mazda quoted $350.00 for a new COP so I decided to upgrade the whole ignition and go to the LS2 style coil. I bought a set of LS7 coils with connectors and pins from Goleby Parts from Toowoomba for $200 delivered. Check out their web site. The order was placed mid morning and turned up the following day (Brisbane). With the dollar down I was not so pleased to not have to go to the US to shop.
Looks like I will have to get the ignition leads custom made. Have any forum members had leads made recently? Any recomendations?

Postby **Okibi** » Thu Sep 17, 2015 12:13 am

timk would be the best person to ask, but search his forum posts im sure there's plenty of info.

Some here:
http://mx5cartalk.com/forum/viewtopic.php?f=55&t=68000

and here:
http://mx5cartalk.com/forum/viewtopic.php?f=57&t=51007&start=165

tbro · Postby **tbro** » Thu Sep 17, 2015 12:01 pm

Looks like I will have to get the ignition leads custom made. Have any forum members had leads made recently? Any recomendations?

there is a mob at Toowong, use to be at Kallanger that do leads, heaps of the older members, boags and UA had leads made there, but stuffed
if I can remember their name, Calling 1red5/steampunk.

Found it, Qld ignition Leads :roll:

0416 366 486

Steampunk · Postby **Steampunk** » Thu Sep 17, 2015 12:13 pm

tbro wrote:Calling 1red5/steampunk.

Found it, Qld ignition Leads
0416 366 486

Queensland Ignition Leads.... oh you found it

Toowong, then Kallangur?!?!?
Geez these guys move around as I'm certain when I went there around 2008 they were somewhere around Northgate.
There's only 2 of them and no big/heavy equipment so I guess they just hop around different locations for sh#ts and giggles...?