Page 1 of 1

NA6 oil leak

Posted: Sun Aug 09, 2015 10:37 am
by mitch_f1
So I have a couple of different oil leaks and I'm pretty sure I know what they are, but I just want to use the collective knowledge here to exhaust other possibilities.

It is from the passenger side of the rear of the sump, near the sump/gearbox seam. There is no oil coming from the gearbox drain, but it is moist halfway up the exhaust side of the block. I am thinking that this is the sump oil seal, as the rear main seal has been replaced within the last 2 years. Is it possible that the sump has a fracture in it?

Image

Image

Image


The other leak is at the head/block join right at the back of the engine. It is just a misting of oil, not even enough to drip down. Could this feasibly be the head gasket?

Any help appreciated, thanks :)

Re: NA6 oil leak

Posted: Sun Aug 09, 2015 12:07 pm
by 93_Clubman
CAS o ring

Re: NA6 oil leak

Posted: Sun Aug 09, 2015 12:31 pm
by mitch_f1
The oil isn't that high up the block, also its the wrong side

Re: NA6 oil leak

Posted: Sun Aug 09, 2015 12:34 pm
by 93_Clubman
mitch_f1 wrote:The other leak is at the head/block join right at the back of the engine. It is just a misting of oil, not even enough to drip down.

Re: NA6 oil leak

Posted: Sun Aug 09, 2015 12:38 pm
by mitch_f1
Still wrong side (exhaust side), and still no oil further up.

Re: NA6 oil leak

Posted: Sun Aug 09, 2015 3:10 pm
by 93_Clubman
NA8 here, so I'm used to the CAS being on the exhaust side.

Re: NA6 oil leak

Posted: Sun Aug 09, 2015 4:56 pm
by mitch_f1
No worries, thanks anyway. The o-ring is being replaced anyway, just wondering if there is something I missed.