Page 1 of 1
Extractors for an NA Automatic?
Posted: Mon Sep 09, 2013 7:28 pm
by Kallaroo MX5
Hello all,
I have tried a set from a manual NA and the oxygen sensor mount/hole hits the trans pan, is there a set for the auto?
Cheers
Re: Extractors for an NA Automatic?
Posted: Mon Sep 09, 2013 7:35 pm
by emily_mx5
never ever seen any for sale specifically for the auto.
I would get a blanking bolt to block off the current O2 sensor hole, and get a new bung welded somewhere downstream / in the mid pipe section under the car.
You would have to lengthen the wire(s)
Re: Extractors for an NA Automatic?
Posted: Mon Sep 09, 2013 7:44 pm
by NitroDann
Re: Extractors for an NA Automatic?
Posted: Mon Sep 09, 2013 7:49 pm
by Kallaroo MX5
Yeh thought about that but it is also the bend of the pipe, it is all just too close and needs some major bending, thought there might be a set available somewhere.
Re: Extractors for an NA Automatic?
Posted: Mon Sep 09, 2013 8:44 pm
by emily_mx5
You could get the extractors modified by an exhaust shop, they will know what to do.
Or sell it and buy a manual / do a manual conversion
Re: Extractors for an NA Automatic?
Posted: Tue Sep 10, 2013 11:40 am
by 93_Clubman
Kallaroo MX5 wrote:is there a set for the auto?
What about the set Wozzah suggested to you a couple of years ago:
viewtopic.php?f=29&t=50090
viewtopic.php?f=29&t=49997&start=15Only a few NA6 autos were originally Australian delivered so, apart from Wozzah's, you're best to check what's available in the US:
https://www.google.com.au/#q=miata+auto ... 93+headers
